Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Vacuum adapter for PM 3520b

Posts

Vacuum adapter for PM 3520b

#1

Vacuum adapter for PM 3520b

Jorge

I did bite the bullet and ordered the OneWay rotary vacuum adapter for my PM 3520b.

It arrived today, the vacuum adapter looks really good, but the adapter to attach it to the outboard spindle that came with it is not threaded! The box says Thread:1"Special - Powermatic Part #: 0395.

If you have the PM 3520b and have the Oneway vacuum adapter working could you tell me what is the right part? The spindle itself, without measuring it, looks a little less than the 1 1/4" on the inboard side and it has a fine thread.

I could not locate the manual now that I need it...

Thanks

Jorge

Re: Vacuum adapter for PM 3520b

#2

Never mind. Sorry I did panic...

Jorge

After a good fight, I was able to remove the hand wheel and found that the threaded part of the spindle ends and a smooth 1" section follows...

Blush, blush, blush...

Re: Vacuum adapter for PM 3520b

#3

Jorge, here's the 3520 manual link...

John Kaner

content.powermatic.com/​manuals/1352001_​man.pdf

Hope this helps for future issues... John K.

Re: Vacuum adapter for PM 3520b

#4

Thank you John!

Jorge

Much appreciated, I'll keep it.

Thanks

Jorge

Re: Vacuum adapter for PM 3520b

#5

Phil Stivers

LINK doesn't work.


Re: Vacuum adapter for PM 3520b

#6

Try this: *LINK*

Jorge

The 5th from the top.


Powermatic manuals

Re: Vacuum adapter for PM 3520b

#7

Phil Stivers

Re: Try this:

Phil Stivers

THanks

Re: Vacuum adapter for PM 3520b

#8

My apologies, thought I did it correctly.