A while back I posted a picture of a oak bowl and I asked for sugestions on how to finish it. It is my 1st thin hollow bowl. I did move the major dia. up the bowl a little bit and made the bottom smaller. So here it is finished. I used 3 coats of "salad dressing" finishing. The bowl is 2 3/4 high by 4 5/8 dia. The opening is 2 1/8 inch. I wish to thank all of you for your help.
Atta Go, Dan! Anytime we make something our spouse wants to adopt, its a good thing. After a while, its easy to get to the stage when you either need to limit the number of round objects in the house, give away lots of turned gifts, start selling at craft shows, or hold a big yard sale! I'm at the point where one object in must be balanced by one object out
I can see the improvement in the visual weight of the piece. That's also some nicely figured Oak, a lot more interesting than most of what I've come across.
If you make more like this, you can try variations in shape, height, foot, opening, thickness, decorative details, etc... You'll probably learn more by making a series of similar pieces on a theme than all the comments we could throw at you here in cyber-turning-land.