with a little help from my friends...
GaryG in MD
This one's for you, WC...
Last year, after a wind storm, I followed the sound of a chain saw to a neighbor's house. A black locust had fallen, happily harmlessly, between two houses. I drove over to pick up a few pieces. I guess I must have been looking at the wood too pickily to be going after firewood, because the neighbor across the street came out and asked me what I was doing. I told him, and a few minutes later, he came out with two dry box elder branches in his hands. He said he'd been saving them for "something", but it never happened, so would I like them? Grin.
So I made a nice little shallow, end-grain bowl that a Canadian friend of mine glommed onto because the red fungal pattern made him think of their flag. Fair enough! I finally got around to making a side-grain HF to highlight the patterns. I had to post questions here on WC twice as I went through the making process -- once to learn how to use the Hunter #1 TS tool without having it pulled inside, and again to learn how to design the opening properly.
Mike Hunter, who was kind enough to call me with support and encouragement, said he'd like to see the end result.
I have to say that it was received with some enthusiasm and appreciation at two Show & Tell sessions last weekend.
So here it is for Mike and for all you WC'ers who helped me with this project.
(You can't see it in this photo, but needless to say, the pith patterns are similar on both sides, and balanced both horizontally and vertically.) It's 3-3/4" tall and 5" in diameter and quite thin and light. It feels nice in the hand, and the interior is pretty smooth with no sanding (particularly inside the opening, thanks to the Hunter tool, which I now love). The finish is water-based poly to keep from yellowing it. Box elder is not a dense wood -- it soaked it up like a sponge, and then sanded easily to a nice Abralon 4k sheen; completed with Ren. wax.
C&C welcome, Gary







