Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

pet urn threads

Posts

pet urn threads

#1

pet urn threads

Dennis Taylor

Does anyone know of a video that demo's using pipe threads for a pet burial urn? Or at least some information that will lead me in the right path. I thought I seen a video or something online, but sure can't seem to relocate it now. tks Dennis

Re: pet urn threads

#2

Re: pet urn threads

john lopez

One method here, illustrated with still photos

http://www.woodturningonline.com/Turning/Turning_content/Threaded_inserts_for_urns.pdf

I did one recently and instead of a threaded insert I simply

turned a shallow rebate or groove where the lid meets the top of the vessel.

Once the ashes were inside a bead of molten beeswax was dripped

carefully from a candle into the rebate creating a durable and effective seal.

Re: pet urn threads

#3

Re: pet urn threads

John Lucas

That's pretty much how I did it except I roughed up the glue surface of the PVC by scratching it with the point of a knife. Before I did it I tried every glue that I had to see what would stick to the PVC. Nothing was very strong and could be peeled off fairly easily by sticking your finger nail under it. That was on the unroughed smooth surface. I believe I ended up using epoxy because I felt that it would bond better to the glued rough surface.

I also think I cut some grooves on the glue surface to sort of act like ring shaped dowels so even if the glue didn't actually stick to the PVC all that well the glue dowel would keep the ring from pulling out.

In reality if it's an urn you will only be removing the lid a few times, mostly to play with it until the remains are put inside, then it won't be opened again.

Re: pet urn threads

#4

Ric Taylor

Re: pet urn threads

Ric Taylor

Dennis,

Not just for pet urns, but any kind of urns.

I used PVC fittings on my wife's urns, which were made of mesquite. At first I struggled with adhering the PVC to the wood, most glues will not stick to PVC very well. Then I discovered an epoxy glue that is designed for using on PVC. I don't remember the name of it, but I found it in the glues section at Ace Hardware.

Ric


Re: pet urn threads

#5

not to hijack this thread....lettering?

Henry (Raleigh NC)

Ric - thanks for idea to use insert threads.

I was also intrigued by the "engraving/lettering/laser-scribing" on the urns. How did you accomplish this? I need to do something very similar on a graduation present 'project request' and have not made any progress.

Henry

Re: pet urn threads

#6

Ric Taylor

Re: not to hijack this thread....lettering?

Ric Taylor

I have a small laser-engraving business.

Any fully-equipped trophy business in your area should be able to help you.

Regards,

Ric

Re: pet urn threads

#7

Re: pet urn threads

Dennis Taylor

Rick,

those are beautiful, and the threads are just what I was looking for. The engraving really sets of the urns you have there, very beautiful and respectful, great job. Would you be willing to provide size of plumbing threads and size of completed urns? thanks. Dennis

Re: pet urn threads

#8

Ric Taylor

Re: pet urn threads

Ric Taylor

Dennis,

The three urns pictured were made for each of her three adult children. I still have some cremains that I am saving until I find a special piece of wood to make the final urn for myself. Those in the photos are 8 inches tall.

The PVC fittings are standard 3-inch fittings available inexpensively in any hardware store. I used the female threads in the bodies and the male threads in the lids.

Regards,

Ric