Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Beads Afire!

Posts

Beads Afire!

#1

Beads Afire!

Dick Wilson

I have loved the beaded forms that Wally Dickerman has posted.

I have been practicing turning beads with a Drozda style spindle gouge. I have become fairly good at turning larger beads (1/2" to 3/8") so once I turned this Box Elder exterior to become a HF I decided to turn 1/4" beads. I found out quickly that turning small beads is more challenging than turning larger beads. I have a ways to go.

HF is 12"x7" with approx. 1/16" wall from bottom of bead to inside wall. I wanted to do something different for the top. I had these "sticks" that I have tried on several other turning. I turned the top to mimic the form, dyed to match the red of the Box Elder, and used the sticks which kinda match the color and form of the beads. Comments and critiques welcome


Re: Beads Afire!

#2

I'd say your doing pretty well-nice piece


Re: Beads Afire!

#3

Re: Beads Afire!

matt overton

nice job!

Re: Beads Afire!

#4

Re: Beads Afire!

Dick Coers

Like the hollow vessel and the sticks a lot, but not the pacifier on top. Seems to pull my eye to it right away. I can see the form shape you shot for, but too much for me. Maybe smaller, or natural color would not make it a focal point. Maybe the sticks should have been red and the top natural? Great craftsmanship!

Re: Beads Afire!

#5

Dick Hines

Re: Beads Afire!

Dick Hines

Don't look behind you Wally, there is someone gaining on you.

Nicely done Dick.

Re: Beads Afire!

#6

Re: Beads Afire!

Terry Scott

A beauty that will inspire many (including me )