Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Western NC, Asheville area

Posts

Western NC, Asheville area

#1

Western NC, Asheville area

Don Evans

Hi all:

Question for you westerners in the hilly part of my home state. Wife and I planning a trip to Asheville area (from near Raleigh), and am wondering what woodturning things are near where we will be. I remember hearing something about a gallery? or something to due with turning that is located on the Blue Ridge Parkway, does anyone know what that may be or a web link to it's site (assuming it has one).

Also, what is the closes turning and other things type school to that area and how long to get there from Asheville.

Like Campbell is it at Brasstown? With the roads how much time to drive from Asheville? Cannot remember what the other big school is, one I'm thinking of could be just over border in Tenn. I know I can look this up on web but hoping to stimulate some experienced comments on the area.

Any recommendations as here to stay the nights, not interested in anything like the Grove Park Inn (been there done that several times) something more mid range like upper chain type would be ok, Hilton etc. I believe all these chains have become a chancey(?) place depending on which one you're at. Example is a Hilton we stopped at in NJ last year only to discover that the restuarant was not open due to time of the year. That didn't stop them from charging twice what the room was worth though. I would put that particular one on the level of a 1960's Holiday Inn for those who remember those days.

Don

Re: Western NC, Asheville area

#2

Re: Western NC, Asheville area

Bill Turpin in WNC mountains

www.carolinamountainwoodturners.org meets on third Saturday 5 miles east of Asheville. CMW has almost 400 members with FREE demonstrations every month. www.cormarkint.com a wood supplier to Woodcraft is ten miles north of Asheville. Folk Art Center is where CMW meets. It is a sales center for Southern Highlands Craft guild. Multiple museums. JC Campbell is about 90 minutes west at Brasstown. Arrowmont is at Gatlinburg, TN about two hours west. There are several small schools in Asheville. Google search for Joe Ruminski, woodturner. PM me if you want more info. Biltmore House has stuff made from 48" wide boards in 1880s, tickets are not cheap.

Re: Western NC, Asheville area

#3

JL

Re: Western NC, Asheville area

JL

JC Campbell is ~2 hours from Asheville. I don't like driving that fast on either US 64 or US 74. Your speed may vary.

Arrowmont is in Gatlinburg, TN.

When are you thinking about coming this way?

Re: Western NC, Asheville area

#4

Re: Western NC, Asheville area

Don Orr

Isn't Penland school near Ashville?

Re: Western NC, Asheville area

#5

Re: Western NC, Asheville area

Hugh

Don,

Not quite woodturning - but the "Blue Sprial" gallery in Asheville is worth it. They do carry a number of turners - but there is a bunch of other "ART" also.

Places to stay - about an hour away on Lake Lure is "Lodge at Lake Lure". A bit pricey - but my wife likes to stay there. And about 30 minutes away from that is the town of Saluda - Stony Lamar's wife has a resturant there called "The Purple Onion". Music on the weekends evenings I think.

If you like to walk - in Bat Cave is "Chiminey Rock" - great views and great granite rock.

My wife and I hit them all when we get close. I have no connection to any of these other than I have been there. It is about a two hour drive from Lake Lure to Gattlinburg (Arrowmont). We are going there again this summer from the west coast. Hugh

Re: Western NC, Asheville area

#6

It is a little Northeast of Ashville


Re: Western NC, Asheville area

#7

Re: It is a little Northeast of Ashville

John Jordan

There is currently a very good AAW sponsored exhibition at the Folk Art Center,

and the Grove Park Inn is well worth seeing. Nice galley and artists studios there. Google it.

John

Re: Western NC, Asheville area

#8

Many of the roads on the NC/TN border....

JamieDonaldson

...area have serious twisties, similar to a section known as "Tail of the Dragon!" Unless you're driving a Porsche or riding a Harley, don't plan on getting anywhere at the regular posted 55~65 MPH!!! But they sure are fun to drive!!! :D

Re: Western NC, Asheville area

#9

Keith Tompkins

Re: Many of the roads on the NC/TN border....

Keith Tompkins

Now you're talkin' Jamie! Don't forget Black Mountain..good crafts.

Re: Western NC, Asheville area

#10

Re: Many of the roads on the NC/TN border....

john lucas

55 to 65? Jamie this is Nascar country. Well go twice that speed around any left hand corner. Can't say what will happen when we try to turn right? :)

Re: Western NC, Asheville area

#11

On "The Dragon" you had better be able ....

JamieDonaldson

...to turn both directions, with 315 switchbacks in a 13 mile stretch of road, but I'm always too busy driving to count! And be on the lookout for the crazy "crotch rockets!"

Re: Western NC, Asheville area

#12

Re: On "The Dragon" you had better be able ....

John Jordan

We would just use your little car as a jump. :)

Actually, I would avoid it on a weekend, or most days in the summer. There's roads near there almost as good that will be mostly empty.

John

Re: Western NC, Asheville area

#13

Re: On "The Dragon" you had better be able ....

Randy Gleckler

It's so twisty, my wife gets car sick on mountain roads unless she's driving. We took that route one time and she was driving and still got car sick. I can't imagine coming across one of the Semi's or RV's they show pictures of on that road. Some of those turns have to be a 4 point turn to make it around..

Re: Western NC, Asheville area

#14

Re: On "The Dragon" you had better be able ....

John Jordan

Pete Kekel from Ohio followed his GPS and went though the Dragon during high season dragging a big ass trailer full of turning wood. He was on his way to the Southern States Symposium. Said there were a lot of bikes giving him the finger. :D

John

Re: Western NC, Asheville area

#15

Re: On "The Dragon" you had better be able ....

john lucas

When the roads were all closed due to the rock slides a year or so ago I had to take the next road south of the Dragons tail. I followed a semi. Twice he had to stop and back up to get around corners and all other traffic had to stop.

Re: Western NC, Asheville area

#16

Re: Western NC, Asheville area

Don Evans

Thanks to all of you for responses. Unfortunately walking is a problem I have due to back and neck trouble. Winding turning roads don't affect me, reminds me of the good old days when the back seat was out and gallon jugs taking it's place. We have been up there and done all the tourist places even the train ride used in the movie "Fugitive", but we wanted something else this time.

John, you are right about the Grove Park Inn but I've stayed there several times and had to walk a mile just to get to the room, I think I was in Virginia and the lobby was in NC.

Biltmore is absolutely a place anyone should see and been sure and take the "behind the scenes" tour, they didn't have that the first 2 times I was there but did the third time. I like it much more than the regular tour. You get to see all the innovations that was used to make things like "indoor" plumbing and hot water in the bathroom! Indoor pool and bowling lane. The horse barn also, the horse's lived better than the regular people in the area.

Don

As long as I have two wheels on the ground I'm ok still got 2 more in reserve if I need them!

Don