Lifting logs
Steve Criscenzo
Several months ago, there was a thread going about equipment for lifting wood into pickup truck beds. At the time I was away on business and could not post pictures of my equipment.
Yesterday, i got a call from a friend who had some cherry and sycamore for me so I got my crane out of the shed and off I went.
I purchased the crane from HF during one of the 20% off sales. Out of the box, the crane just lifts with hydraulics. I added the boat trailer winch to give it more range.
It mounts to the the hitch receiver using a receiver extrension. I extended it out so that it will work with the tailgate down. I added the two outrigger jacks to help with the torque on the hitch when working off to the side. I works great and allows me to work by myself. One piece yesterday weighed about 200 lbs. In a pinch, I have also used it to help get a large blank mounter to the lathe.
I have found that a heavy srew eye screwed into the log works well as an attachment point. I srew it into the end on shorter logs and into the side on longer logs. THe unit swivels on its mount so I can pick logs up and rotate them into the bed of the truck.
Photos 1 and 2 are details of the mount. Photo three is the unit with the crane attached hold a log.







