Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Idea for woodturning clubs

Posts

Idea for woodturning clubs

#1

Steven Antonucci

Idea for woodturning clubs

steven antonucci

The other day I was looking for an idea that would drive more participation at my local chapter and I think I have one, so I would like to share it with you all. Assuming that your clubs are like mine, you probably have a core group that does demonstrations throughout the year, and a group that watches. How do you get new people to demonstrate?

Tonight, our club is doing something for the first time: The Five Minute Demo. I realize that not everyone is going to be able to pull off an hour of detail, or is comfortable in front of a crowd, but we always do a show and tell and the average is five minutes.

Tonight's session is going to be a series of short demos, and hopefully given by people who would otherwise just watch. As an example, my demo will be blackening with a torch and wirebrushing. The topics will be finite and hopefully inspire people to try some new things.

Feel free to try this at your club as a means of involving new people. I'll report back tomorrow on how much participation we had.

Steve

Re: Idea for woodturning clubs

#2

Nice idea, Steve!


Re: Idea for woodturning clubs

#3

Re: Idea for woodturning clubs

Dan Jechura Temperance Mich.

please explain your demo for a newbe.

thank you

Dan j.

Re: Idea for woodturning clubs

#4

Steven Antonucci

Short version

steven antonucci

Turn something from an open grain wood like oak or ash.

Use a plumbers torch to char the surface.

Take a wire brush to remove the char.

The remaining surface becomes textured because the early wood and late wood have different hardness and burn at different rates.

Either repeat or cover in wax and buff.


The platter in the back right is white oak, and has been burned and wirebrushed. It has an elephant skin like texture.

Steve

Re: Idea for woodturning clubs

#5

Re: Short version

Dan Jechura Temperance Mich.

Kool

So if I try this on the weekend and burn my shop down you will buy me a new shop?

Thank you I will have to try this.

Dan J.

Re: Idea for woodturning clubs

#6

Steven Antonucci

If you have to ask

steven antonucci

1.) Direct answer: no. You know what you can and cannot do. I make no warranties about your ability. I do this in my own shop, but by the door. I have a cement floor, and I understand that burning wood is, well, burning wood.

2.) The goal is to make someone try it. Part of the five minutes will be how to do that without burning down your shop. Always work smartly, and wear old clothes... it's messy work.

Steve

Re: Idea for woodturning clubs

#7

I've participated in mini demos..........

JamieDonaldson

...like this, but in 10~20 min. time allotments. 5 min. is very short and doesn't allow much time for set-up and delivery.

Re: Idea for woodturning clubs

#8

Brad Vietje

Re: I've participated in mini demos..........

Brad Vietje

Nice idea, Steve,

I'm with Jamie -- would be nice to have at least 10 minutes to do something fun.

Maybe a top turning challenge?

Clear skies,

Brad Vietje

Newbury, VT

Re: Idea for woodturning clubs

#9

Keith Tompkins

Re: I've participated in mini demos..........

Keith Tompkins

Hey Brad, Jamie, and Steve...I would like ten minutes too, that way I could complete a goblet and a small bowl. :D

Re: Idea for woodturning clubs

#10

Steven Antonucci

5 minute "limit" is arbitrary

steven antonucci

If people go over a little bit, I am sure that I won't flip the egg timer on them.

and Keith, I'll race ya...

S

Re: Idea for woodturning clubs

#11

Re: If you have to ask

bill Crommett

And besides that, little kids shouldn't be allowed to play with matches.

Re: Idea for woodturning clubs

#12

I'll do a goblet, bowl and I'll raise you an egg.

John Lucas

OH I thought this was poker. Steve I think that's a very good idea. It's sort of like the tips pages of demos. Whoever wants to can simply come up and give a tip or demo, within limits of course. I'll pass that on to our President.

Re: Idea for woodturning clubs

#13

Brad Vietje

...all turned from rice!

Brad Vietje

Sure, John -- but we'd need a pretty good video camera to see those little buggers!

I like the tips part, too.

One of the best safety tips I remember was one John published in American Woodturner a number of years ago -- putting little tabs of masking tape on the outer edge of a chuck (or ends of the jaw slides) to serve as a warning that you were getting too close to a potential hand grinder. I don't remember who submitted that idea, but it always seemed like a great idea to me.

As for high-speed turning, I could maybe make around 8 simple tops in 10 minutes, but I'm way too finicky about egg shapes... I just couldn't bear to let a lumpy egg go without sanding it! 8) Top, bowl, and a goblet -- no problem-o; might need a little more time for the captured ring, though ;).

Cheerio,

Brad Vietje

Newbury, VT

Re: Idea for woodturning clubs

#14

Steven Antonucci

Here is what happened:

steven antonucci

First off, it was about what I expected. Many people didn't bring anything, but lots of people did. It forced people to engage in conversation and provoke thought, which was good.

My 5 minute demo started when someone looking at my S&T piece asked me how I chattered it. The also asked how someone burned a line. We walked over to a lathe, and I showed them chattering with a spindle gouge hung out 6" over the rest. Then, another guy found a wire burner, so I cut a small v groove and burned it. Demo #1 and demo #2 took about 45 seconds together.

Throughout the night, we had a variety of topics which covered chucking natural edge bowls after they move, making a hook tool from a masonry nail, carving, and we finished with fire...

All in all, probably 10 sessions in about 60 minutes, with some being a little longer and some being very short. If you didn't learn something tonight, it wasn't my fault...

Steve

Re: Idea for woodturning clubs

#15

Keith Tompkins

Re: 5 minute "limit" is arbitrary

Keith Tompkins

Steve, now THAT would be fun!!

Re: Idea for woodturning clubs

#16

Steven Antonucci

Gentlemen, start your lathes...

steven antonucci

Perhaps we can figure out a way to do this when you come to the valley as part of the monthly meeting? I agree that it would be fun, and I think the gang would find it funny if you beat me... if ;)

Steve