Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Cradle

Posts

Cradle

#1

Cradle

Ken George

Here is a picture of the cradle for our soon to be new grandson(she is due April 12). I had asked for recommendations for a duplicator to use in making the spindles. It was almost unanimous that it would be better to make a pattern and turn them free hand. Well I did and after ruining several, accepted less than perfect product. It seems that turning to a pattern should be easy, for me it was not. Could be lack of patience! This was my first mortise and tenon project and it was, to say the least, a learning experience.

She wanted cherry and I chose sapwood as it has grain patterns that I like. That also presented some issues with warping and trying to adjust.

Anyway it is done and our daughter is delighted.

Re: Cradle

#2

Re: Cradle

Hal Taylor

Good job! Spindles look great. I'm quite sure daughter (and grandson) will love and cherish this cradle.

Re: Cradle

#3

Steven Antonucci

The important thing is that you made it

steven antonucci

Prior to becoming a turner, I made one for my first born too. It isn't perfect from a woodworking perspective, but it is a family heirloom.

And now, so is yours.

Congrats and good luck with the baby.

Steve

Re: Cradle

#4

Re: Cradle

Randy Gleckler

Great Job Ken. I made one of these as well and we loved it. We used it for 2 of our kids, 3 Cousins have used it and now some friends are using it for their first born. It's a great thing and I still find joy in it. You did a fantastic job.

Re: Cradle

#5

Re: Cradle

adrien

The old harpsichord makers had to be sure that one of the keys was slightly different from the rest, so that it showed it was man-made and had a flaw, for only the good Lord can achieve perfection. But you come awfully close.

Re: Cradle

#6

Looks great from here!


Re: Cradle

#7

Re: Cradle

bill Hayes

I made a nearly identical cradle for my first garandson about 15 years ago. It also was made of cherry.

I found I could buy the spindles cheaply rather than turn them(Heresy for a turner).I like the cradle and it looks very well done.

Bill

Re: Cradle

#8

Brad Vietje

Re: Cradle

Brad Vietje

Fantastic project, great result, and congratulations, Ken!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Cradle

#9

Mike Stafford

Re: Cradle

Mike Stafford

Ken, that is a family heirloom and the fact that you know its imperfections matters not a bit because they are concealed by the love you put into the piece. I think your cradle is beautiful!

Re: Cradle

#10

Re: Cradle

Ken George

Just wanted to thank everyone for their kind words and congratulations. The time is drawing near and we are all anxiously awaiting Wesley's arrival.