Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Little Red Apple Bowl

Posts

Little Red Apple Bowl

#1

Dan Jechura

Little Red Apple Bowl

Dan Jechura

I finished a few bowl this last week and a coup;e of them are made of 58 year old apple from the local orchard. I've eatten apples there many a time so I am please to have a bowl from a tree that was planted 1 year after I was born. The bowl is 7 inch wide by 2 1/4 tall and finished with 5 coats of General Finishes "Salad Dressing Finish". I just love the dark red color vs the light color. I'm new at this so if you wish to give your opinion it will help me to get better.

Thank you for your time.

Dan J.




Re: Little Red Apple Bowl

#2

Re: Little Red Apple Bowl

Skip Beardsley

Nice bowl and interesting detail on the foot. What made you choose that design element? I agree, I like the change in color, makes for interesting visual impression.

Skip

Re: Little Red Apple Bowl

#3

Brad Vietje

Re: Little Red Apple Bowl

Brad Vietje

Nice little bowl, Dan!

Some woods have great contrast between heartwood and sapwood -- Apple is one of my favorites, though not as easy to dry without cracks as some others. Black Cherry, Pear, and Plum are a few others that are nice to use (and somewhat challenging to dry).

Have fun,

Brad Vietje

Newbury, VT

Re: Little Red Apple Bowl

#4

Dan Jechura

Re: Little Red Apple Bowl

Dan Jechura

Interesting good or interesting bad? Becuse I am new at this I am trying things. I was told I needed to raise the bowls off a table to show off the bottom of the bowls. So I am trying out different types of feet. I also do not like them plain so I am trying out patterens. The center recess is the chuck mounting hole. The bowls evolve out of the logs. I really do not know what shape it will be, even though I sometimes start out with a shape in mind. I have a smaller bowl that is similar but smaller that I like even better. They both remind me of a ice cream dish.

Most of the apple tree logs I brought home where 15 to 20 dia. I cut them in to thick ( 4 to 6 inch) planks to get 1 or 2 deep bowls and some left over wood. This bowl was made out of the left overs.

Dan

Re: Little Red Apple Bowl

#5

Re: Little Red Apple Bowl

Skip Beardsley

Dan,

Interesting is not good or bad, in my mind. Not the case here but some design elements are not ones I would choose to use but do stretch the imagination and I like that.

As a new turner I suggest you read the design articles at Russ's corner. In fact, I would suggest all of his articles. If you read and understand the principles set forth there you can't go wrong.

As far as getting lift to a bowl, that is a subjective thing. I usually like to put feet on my bowls and usually try to make them about one third the size of the largest diameter. Usually not very tall, a quarter inch to three eights tops. This allows me to make the curve of the outside continuous from the lip to the center of the bottom, which I find most appealing.

There are lots of places to get inspiration and also to see well designed pieces. Most of the post here are exceptionally good. There are also galleries connected with many sites which are good places to look.

Hope that helps.

Skip

Re: Little Red Apple Bowl

#6

Keith Tompkins

Re: Little Red Apple Bowl

Keith Tompkins

HI Dan, I think you are off to a good start! In my opinion, here are a few things you should do; each will be a great benefit to you. Richard Raffan and David Ellsworth each have written excellent books on bowl turning, including advice on bowl design. Just reading through them will make you a better turner. Pick up the bowl turning dvd by Glenn Lucas. I saw his demo today at the Totally Turning Symposium...very impressive, and his advice will help a great deal. Last find a local turning club, and become best friends with the best turner in the group. Developing good habits, and focus on design right from the beginning , that will speed your development tremendously.