Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Jet 1642 indexing capability

Posts

Jet 1642 indexing capability

#1

Jet 1642 indexing capability

Starry Chan

For those of you have a Jet 1642, how do you use its indexing capability?

There are three threaded holes on side of spindle hub. By using the center hole, I was able to use it to index 12, 18 or 36 positions. So what are the two other holes for?

Starry

Re: Jet 1642 indexing capability

#2

Re: Jet 1642 indexing capability *LINK*

ihmserv

don't know if this will help or not.

the link is to the pm3520 manual

page 28 shows how to get the various hole patterns using the other holes.

IAN


http://content.powermatic.com/manuals/1352001_man.pdf

Re: Jet 1642 indexing capability

#3

I found the answer in the Jet manual

Starry Chan

Thank you for your tip. I found a similar chart in the Jet 1642 manual.

Starry