Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Finishing Maple Burl Bowl with Natural Edge

Posts

Finishing Maple Burl Bowl with Natural Edge

#1

Finishing Maple Burl Bowl with Natural Edge

Tom

Suggestions on best finish(es) for subject bowl? Appreciate any thoughts. Tom

Re: Finishing Maple Burl Bowl with Natural Edge

#2

Re: Finishing Maple Burl Bowl with Natural Edge

John Lucas

Natural edge bowls are show pieces for the most part rather than functional. I use Minwax Wipe on Poly. It's just about fool proof but does take quite a few coats if you want a gloss finish.

Re: Finishing Maple Burl Bowl with Natural Edge

#3

Lyle Jamieson

Sharp sandpaper


Re: Finishing Maple Burl Bowl with Natural Edge

#4

Re: Finishing Maple Burl Bowl with Natural Edge

Dick Coers

Two coats of thin dewaxed shellac will reduce the number of wipe on poly coats dramatically. I don't put much finish on the bark because I don't like that to look like plastic. A compressed air blow gun is a good way to remove excess finish from bark.

Re: Finishing Maple Burl Bowl with Natural Edge

#5

Re: Finishing Maple Burl Bowl with Natural Edge

Tom

Once again, great advice from WC folks!! Many thanks for your responses!! Tom