Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

OT-Woodturner plays Mechanic

Posts

OT-Woodturner plays Mechanic

#1

OT-Woodturner plays Mechanic

MGould

Good quick-fix story.

My neighbor comes over last night about 10 minutes before I have to head out for a Cub Scout pack meeting.

He has a shredded serpentine belt in his hand.

His Dodge Truck with 5.7 L Hemi ate the belt on his ride home. He tells me he has no mechanical skills and asks if I can help out.

I let him know I have a meeting but will help when I get back about 8:30PM (dark).

I tell him if he gets the parts I'll put them in for him. I take a quick look at the motor and everything else seems OK.

I tell him to run to the Auto parts place (20 miles away) and get a new belt.

I go to the meeting and get back around 8:30. He had gone to the parts place and picked up a belt.

I grab my portable light and my tool kit(s) and set up on the top of his engine.

I download a diagram of the belt path off the web (Dodge does not have the belt diagram in the engine compartment).

We figure it out and start working the belt around the pulleys and idlers.

I get to the bottom idler pulley and figure out (again in the dark) that it is seized and was the original cause of the shredded belt.

Well, the parts places are all closed by now and my neighbor has to be to work by 6:30AM.

So, I start digging and see if I can come up with something in my basement.

I find an old urethane roller blade wheel with a bearing that matches the shaft diameter of the mounting bolt (Metric BTW).

Of course the roller blade wheel is V shaped so I chucked it in a screw chuck on my wood lathe and turn the outside surface flat.

After turning it flat, it is about 2-1/2" in diameter.

I pack the roller blade wheel bearing with as much Hi-temp bearing grease as I can get in there and mount the wheel in place on the motor.

I run the belt around and it sits pretty good. The tension arm has enough adjustment to take up the wrong size of the (new) idler pulley.

The belt even sits on the new pulley OK. We fire up the motor and it seems to work well enough.

Now I know the roller blade bearings are no where near designed for the RPM of a motor. And that it will probably also disintegrate.

But for a in the dark fix to get a guy to work the next day We had to try it.

Worst case he loses another belt and has to limp to work.

I was quite happy with the quick fix and if it holds together until he can get to a parts store today and get the right pulley all the better.

I'd call that a good bodge job.

If I still drank I would have popped a cold one and celebrated.

Just thought I'd share.

---Nailer---

Re: OT-Woodturner plays Mechanic

#2

Love it-you would fit right in around here


Re: OT-Woodturner plays Mechanic

#3

Both Clever and Brave!


Re: OT-Woodturner plays Mechanic

#4

Ingenuity in action!


Re: OT-Woodturner plays Mechanic

#5

Good Neighbors Make The World Work Better

charlie belden

We get by with a little help from our friends, to paraphrase the Beatles. In this case, it was more than a little help.

Wish this was our country's values system rather than "monetizing" everything to determine their worth.

You made my day - and confirmed, once again, that there are far more angels than A-holes in the word.

Thanks

Re: OT-Woodturner plays Mechanic

#6

Re: OT-Woodturner plays Mechanic

john lopez

Excellent "thinking outside of the box" use of the machine.

I've turned schedule 40 pvc bushings for use in fish tank setups.

Sometimes the piece you need can't be found or it is needed

after hours.

Maybe it's just a case of using an odd size of hose on a life support system. Necessity is the mother.

Re: OT-Woodturner plays Mechanic

#7

Re: OT-Woodturner plays Mechanic

Guy Bratt

Do we know if he made it to work?

Re: OT-Woodturner plays Mechanic

#8

Rob Wallace

Re: OT-Woodturner plays Mechanic

Rob Wallace

GREAT STORY - creative and excellent way to make it work.

I LOVE when kludged and cobbled repairs really WORK in the end!

I was waiting to read about using some duct tape and bailing wire, but you got through this one without those essentials.

Thanks for sharing this!

Rob

Re: OT-Woodturner plays Mechanic

#9

Re: OT-Woodturner plays Mechanic

MGould

Sorry I've been leaving you all hangin'

Been busy here.

The conclusion of the idler pulley saga.....

Neighbor left for work the next day. Made it there just fine. Distance was about 30 miles of mixed local and highway driving.

His girlfriend tried to help him out and went to the parts store to get the replacement pulley. She delivered it to him at work. They pulled off the belt and the rollerblade pulley and attempted to put the correct one on. It seems the she didn't specify that they needed the whole pulley assembly (ie. Bolt/bushing/washer/etc.). So no-joy on the parking lot replacement.

He ended up putting the rollerblade pulley back on and drove it home. Took him until Sunday to get around to replacing it completely and correctly. I came home on Sunday and the tools I had let him borrow were waiting for me on my front stairs.

Guess he learned a bit about bending wrenches and getting grease on his hands after all.

All told he drove about 200 mixed miles on the bodged pulley.

So in the end it was a successful repair.

Now back to some 20+" maple bowl blanks I cut up and brought home on Saturday.

Thanks.

---Mike---