Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Something new for me

Posts

Something new for me

#1

Steven Antonucci

Something new for me

steven antonucci

The Water Gap Woodturners had a surprise burst in growth earlier this month. Our normal group of 12 or so had a sudden increase in membership by about 5 new members! Last time we had that kind of growth was our first meeting.

One of the new members is a guy named Seth, who happens to be a high school band director. He brought in conducting batons that he made, and I thought they'd make a challenging project and a nice gift for my son's band teacher. Parting gifts, I suppose, as my son goes to high school next year.

The top section is walnut and the bottom section is briar from a pipe blank that was brought by another one of the new guys. Seth showed that his could be separated for storage, so that's how I made mine. I assume it is that way to replace the thin part if it breaks, but that's just a guess. Seth also explained that the knob at the end counterweights the long slender part, meaning that it should balance at the juncture where the two points meet.

I could lie to you all and suggest that I nailed it first try, but I won't even try to pull that off. The stick had to be rechucked in a drill chuck, and it was sanded to final thin-ness. It now balances just in front of the junction, and I'm not going to go nuts over the 1/16" it's out of balance.

Comments, witty or otherwise, encouraged and welcomed.


Steve

Re: Something new for me

#2

Re: Something new for me

Bill Turpin in WNC mountains

Steve:

I have made several conductor's batons. I used white fiberglass rod of 1/8" or 3/16" diameter from McMaster. Most batons actually balance about 1" towards the tip from the handle. Many conductors tap the tip vigorously to get the players attention. Wood shafts do not usually last long! The white FG is much more visible for the players. Order more FG than you think that you will use. Oversize freight costs as much as the FG. Exotic pen blanks make unusual batons. Grandson's baton from Bethlehem olive left his band teacher in tears.

Re: Something new for me

#3

Why are Batons short?

John Kaner

As the story goes, in 1687, Jean Baptiste Lully was conducting and using the standard staff to mark the beat. Hit his toe, caused an abscess, got gangrene, died two months later...

Thus, the short baton was created... It was also said that "Armies were led by a little stick"...

Gotta love history...

Re: Something new for me

#4

Re: Something new for me

Dale Miner

Tapping on the music stand to get the attention of the kids? I made one for my grandson's teacher from maple. Lasted almost a year. The info I found looking on line indicated that the shaft should be about 1/8" or less at the tip, and about 3/16" where is enters the handle. The length of the shaft should be at least 11" long, and up to 13" long. Makes for some time spent with skew in one hand and fingers on the shaft with the other.

The grandson will be a senior next year and I thought a redo with better and fancier materials would be in order.

I like the idea of the fiberglass shafting. Do you think that the fiberglass has enough difference in weight that it would be an issue?

Re: Something new for me

#5

Re: Something new for me

Bill Turpin in WNC mountains

The weight is no problem. These have been used continuously for four and five years by female directors. High school directors almost need a club to get the kids attention.

Re: Something new for me

#6

Re: Something new for me

john lucas

I made a couple. What I did was extend a dowel through my chuck and turn an inch or two at a time. the loose end that was extended was fit loosely in my tailscenter with the point removed. that kept it from flopping.

I found that conductors are quite finicky about their batons and usually hang on to the ones given to them as keep sakes but use the ones they have selected themselves. I did work with one conductor on a baton made just for him. We selected the wood which was holly and purple heart. I turned the bottom purple heart part several times to get the balance just right for him.

Re: Something new for me

#7

I've made a number of batons over....

JamieDonaldson

...the years, as I've made many riding crops for horseback riders, and the materials and sizes are very similar. A fiberglass whip shaft of proper size is ideal for a baton, but the company I used to buy shafts from is out of business, so a Google search might be helpful. The old time crops used hickory for the shaft, supplied by the Minton Hickory Co. here in KY, and they made a variety of hickory shafts for many applications, including golf clubs.

Re: Something new for me

#8

interesting thread...


Re: Something new for me

#9

Brad Vietje

Re: Something new for me

Brad Vietje

Nice project with great results, Steve.

Regarding fiberglass.... I recently found a 1/4" fiberglass rod that was apparently part of a movable electric fence. It was black in color, and had an interesting gleam in the sun. Come to find out, the chatoyance was caused by uncountable little glass fibers that were quickly embedded in my little paws, and caused some sharp pains and minor discomfort for a week or more!

Are there different types of fiberglass rods, sealants, maybe UV resistance that we should look for? I have a few reflectors on 4' fiberglass rods (probably 5/16" or possibly 3/8") to keep the snow plow on the driveway and away from my fruit tree saplings, and those are bright yellow and seem to be epoxy coated. No blasted little fibers on these nor, come to think of it, all the fiberglass fishing rods I've used.

So, what do we look for in fiberglass rods?

Safe spinning,

Brad Vietje

Sunny and balmy Newbury, VT