Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Veritas Mk II for sharpening lathe tools?

Posts

Veritas Mk II for sharpening lathe tools?

#1

Veritas Mk II for sharpening lathe tools?

Scott in Douglassville

Hi, all -

I'm looking for an idiot-proof method (required for yours truly) for sharpening all ilks of turning tools. Money is an object; the Tormek system, while it looks nifty, is way outta my league once you start adding jigs. The Veritas Mk II might be doable, though. I can see how well it'd work with flat tools; anyone have an opinion on gouges, though? Or some other method that I might be able to handle?

Thanks,

Scott

Re: Veritas Mk II for sharpening lathe tools?

#2

Re: Veritas Mk II for sharpening lathe tools?

Nick Todd

For sharpening turning tools, I would look at the Wolverine style jigs & a grinder. They were designed with the turner in mind. Will be about half the Veritas Mk II.

Re: Veritas Mk II for sharpening lathe tools?

#3

Re: Veritas Mk II for sharpening lathe tools?

Scott in Douglassville

Nick, would the wolverine work with a larger diameter wheel? I have a 10" 60 rpm wet wheel with a broken platform. This might be perfect!

Re: Veritas Mk II for sharpening lathe tools?

#4

Re: Veritas Mk II for sharpening lathe tools?

Nick Todd

The only difference between an 8" & 10" wheel would be the surface speed & the deepth of the hollow grind. Not big issues.

What would make a difference would be if there is enough clearance under the wheel for the Wolverine jigs. I believe the Oneway web site has all of the diagrams available.

Re: Veritas Mk II for sharpening lathe tools?

#5

My Jet wet with Wolverine

mjonesrdg

I had to trim a little bit of plastic base to accommodate the wood block that positions the Wolverine at the right height. The water tray does not slip off any more, but I have never found it a problem to just blow the crud out whenever the tray is dry.


Re: Veritas Mk II for sharpening lathe tools?

#6

Think I'm sold...

Scott in Douglassville

Thanks for the input, guys. I think the Wolverine is gonna work for me!

Re: Veritas Mk II for sharpening lathe tools?

#7

Re: Think I'm sold...

carl civitella

I have the Scheppach which the jet is cloned from, works for me for about $130.00 these were available before Jet had their copy. I would look into Scheppach, sometimes they have great sales. Carl

Re: Veritas Mk II for sharpening lathe tools?

#8

Re: Think I'm sold...

Scott in Douglassville

I have an old Viking wet/dry grinder that was around that price. The rest looks surprisingly similar to Lee Valley's and I think predates it. A handle broke on the rest, but turns out can be turned with a wrench. It's done an okay job with lathe tools, but my freehanding gouges was never good...

Re: Veritas Mk II for sharpening lathe tools?

#9

Woodcut Hiccup...

Scott in Douglassville

Okay, I got a note from a member here suggesting I look at the Woodcut Tru Grind. Comparable cost to the Wolverine.

Anyone have opinions pro/con for the two? Both videos show the jigs being used with a 6" grinder. I, again, would like to continue to use my 10" wet grinder. I'm emailing the Woodcut folks to see if that's within their tool's capability...