Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Source for a Delta banjo?

Posts

Source for a Delta banjo?

#1

Source for a Delta banjo?

Scott in Douglassville

Hi, all -

I'm looking to upgrade my tool rest to a 24" one a welder friend is going to fabricate for me. I need two banjos, though. I have an early 46-700 lathe, though, and can't for the life of me find a spare banjo for it anywhere. I can upgrade (way upgrade) for about $230, but honestly, I'd prefer to find another in-kind.

Anyone know of a source for these things?

Thanks,

Scott

Re: Source for a Delta banjo?

#2

Rob Wallace

Re: Source for a Delta banjo?

Rob Wallace

Hi Scott:

Very occasionally good banjoes appear on eBay, but this is not a reliable source if you need one NOW.

A year or two ago (?), Packard Woodworks sold a surplus number of a Delta banjoes that would work for that lathe. I doubt they have any left, but a call or e-mail to them wouldn't hurt to see if they have any remaining stock.

There are also some web sites of businesses that cater to power tool restoration (or antique tool restoration) that sell tools or parted-out tools, and you might be able to find a replacement banjo from these on-line resources/vendors. Keep searching on Google or other engines for "wood lathe tool rest holder", or some such set of keywords; "Banjo" might not be the best keyword to rely on for these kind of searches.

You might list a "want ad" request on the WC site, or on the AAW's "Want Ads" page [ http://www.aawforum.org/vbforum/forumdisplay.php?f=3 ] for the banjo that you need.

Good luck finding the second support for your new tool rest. (I managed to find a second banjo for my Jet 1642 on eBay a few years ago, and I use it with my Jamieson hollowing rig's home-made backrest.)

Rob Wallace

Re: Source for a Delta banjo?

#4

Re: Source for a Delta banjo?

Nick Todd

I found it. I sent PMs.

Nick

Re: Source for a Delta banjo?

#5

Joe Fleming

Re: Source for a Delta banjo?

Joe Fleming

Many years ago, I bought a banjo with a 1" tool post from Grizzly. I had to fabricate the clamping block for the bottom side of the ways. Joe

Re: Source for a Delta banjo?

#6

Re: Source for a Delta banjo?

Scott in Douglassville

Thanks for the input, everyone! I actually was able to locate a suitable assembly from a member here. Part's on its way here now!

Too cool. Thanks, everone.

Scott

Re: Source for a Delta banjo?

#7

Lee Valley 24" Tool Rest?

Scott in Douglassville

So, has anyone bought and used one of these things? I have an extra banjo now, so am ready for a tool rest. Opinions?

Scott