Some smaller pieces. The larger cave wall piece is 4"x4", while the smaller is 3 3/4"x 2 3/4". The larger bowl is 4 1/2" x 2 1/4", and the smaller is 4" x 1 1/2". The cave wall pieces are birch burl, and the bowls are maple burl. Each finished with satin wipe-on poly. All four will be submitted to Small Treasures.
Thank you Dennis. It's somewhat new. I made one many years ago, and then not again until about last year when I made one more. These two are very recent. I have to have a burl piece that the natural edge is cut on an angle, so finding wood is a bit of a challenge. I've got two pieces yet to turn out of Australian burl, that should be quite pretty. I really like the concept of these pieces too. They are quite challenging to burn, getting access to the tight wall, but well worth the effort.
Nice ones, Sis! Do you do the burning on the "walls" upside down? Looks like it would be tough to get your hand in there and have any control otherwise.
Molly That's what I 've always tried to teach when I do inside-out turning demos'. That is, you can put stuff inside before you reassemble it and turn the outside. I did one with words written on the inside. that was before I knew how to write with a burner. Your work would definitely be nice on an inside out turning. It would be great fun to look through the holes in the sides and see the cave drawings.