Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

laser pointer

Posts

laser pointer

#1

laser pointer

eliotandmax

What's a good source for laser pointers? Mine are giving me fits -- going on and off , not very bright, etc.

Re: laser pointer

#2

Re: laser pointer

Josh Bowman

If you just want the laser not a pointer here's a source for the laser and battery holder:

Laser and battery pack...

Digi-Key (www.digikey.com)

Laser- P/N : VLM-650-03-LPT-ND (~$ 10.00)

Battery Holder with Switch-

P/N : SBH-321AS-ND (< $ 2.00)

Re: laser pointer

#3

Re: laser pointer

Peter Toch

I make and sell laser pointers for turners that operates on 110VAC instead of batteries. I sell these for $25 plus $7.00 shipping. If interested please contact me by phone at 540-774-4152 or by email at ptoch@comcast.net. Thanks, Peter Toch

Re: laser pointer

#4

Dick Hines

Re: laser pointer

Dick Hines

Googel lazer gun sights. I got one for $19 for my Jamieson rig. It takes 3 #357 batteries and they last a long time too.

I figured if the sight would stand the shock of a .357 going off it would stand up to the vibs of hollowing.

You will have to adapt the laser holder to hold it.

Re: laser pointer

#5

Re: laser pointer

Ed Larson

I just got the CP-TI-327-3VB laser from calpaclasers.com. I have not used it yet but it seems to be of higher quaiity that the ones from Office Depot, etc.

Re: laser pointer

#6

Re: laser pointer

Hal Taylor

I have the same problem from time to time, which is almost always fixed by changing the batteries. Sometimes it seems to be a weak connection so just loosening and retightening the case fixes it.

Re: laser pointer

#7

Re: laser pointer

bob davis

best buy electronics store about 10 years ago. aaa batteries. about 12 bucks. of course would be more by now

Re: laser pointer

#8

Lyle Jamieson

Re: laser pointer

Lyle Jamieson

Usually replacing the batteries will solve that problem. Another issue might be the holding bracket is too tight. If the tubing is compressed it keeps the batteries from making good connections. Just snug up the laser bracket, not too tight.

If it is mine, give me a call. If there is a malfunction I will replace it. However, my home is without elect, heat, water, etc from the Michigan storm. I have taken refuge in a friends home with computer access. Hope to be back in business soon. It has not been a fun few days.