Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

turned 6 bowls tonight

Posts

turned 6 bowls tonight

#1

turned 6 bowls tonight

John Lucas

An artist friend stopped by last night. He needed 6 -3" diameter bowls exactly alike that were half circles. I turned them this afternoon. He's going to paint them. The inside was left straight off the Hunter #4 tool. The outside was shaped with a bowl gouge, cleaned up with the Jordan shear scraper and then sanded with 220 grit. I filled the worm holes with wood putty.


Re: turned 6 bowls tonight

#2

Re: turned 6 bowls tonight

john lopez

Nice work...

What tools or devices do you use to get a series of pieces uniform ?

I'm curious to see a finished piece by the artist.

Is it a collaboration or gouge ninja project ?

Re: turned 6 bowls tonight

#3

Re: turned 6 bowls tonight

John Lucas

John I cut out a cardboard templates, test fitted, see what needs to change and cut there. Repeat as often as necessary. I used the vacuum chuck to turn the outside since it didn't have a foot.

Re: turned 6 bowls tonight

#4

nice job, John...

GaryG in MD

What's the wood? Are they dry? ...Gary

Re: turned 6 bowls tonight

#5

Hickory-bone dry

John Lucas

It turned surprisingly easy with my tool really sharp. I used the Thompson 3/8" V gouge for all roughing and hollowing. I did the final shaping of the inside with a Hunter #4 which left it clean enough I didn't sand it. The outside final shape was done with the Henry Taylor 3/8" gouge sharped to Stewart Batty 45 degree grind.

Re: turned 6 bowls tonight

#6

Re: turned 6 bowls tonight

Randy Gleckler

Nice work John, I was starting to wonder if you only did Demo's and work anymore you've been so busy. Glad you got some time to turn..

Re: turned 6 bowls tonight

#7

Re: turned 6 bowls tonight

Bernie Weishapl

Really nice looking bowls John.

Re: turned 6 bowls tonight

#8

very nice...

GaryG in MD

I love the grain patterns and the shapes.

I have those exact same tools, right down to the branding, except I have the Hunter #3 and #5. I have my DT 3/8 spindle gouge sharpened � la Cindy or Hannes with a convex curve under the cutting edge and no heel. That's one of my "go to" tools. I keep a slightly more trad. grind on my HT 3/8 spindle gouge -- short, 55-deg. bevel. I also have a HT 3/8U bowl gouge, but I find that I'm using it less and less in preference for the former two. It's pretty thin walled and doesn't go very far off the tool rest. ...Gary