Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Staved Mahogany Plant Pot

Posts

Staved Mahogany Plant Pot

#1

Staved Mahogany Plant Pot

gwilki

I glued up 24 staves, turned the outside round and routed out the top 2" of the inside. The outside dimensions are just under 20" in diameter, and about 16" tall. The platter under it is just over 24" in diameter. Finish is one coat of MinWax Sedona Red and one coat of Red Mahogany, followed by two coats of post-cat lacquer.

Re: Staved Mahogany Plant Pot

#2

that's a beauty, Grant...

GaryG in MD

I love the color, and there's some nice stuff going on in the grain patterns.

It appears that you've lined it with black plastic to keep it dry. Very nice. ...Gary

Re: Staved Mahogany Plant Pot

#3

And now you're actually going to...

JamieDonaldson

..fill it with dirt!!! :O :\ :(

Re: Staved Mahogany Plant Pot

#4

Re: that's a beauty, Grant...

gwilki

Thanks, Gary. The wall is lined with heavy black plastic, with black silicone sealing it at the top. The dirt will come just above it. The bottom and the bottom 1" of the way is fiberglass mat and resin. With any kind of luck, it will last a while.

Re: Staved Mahogany Plant Pot

#5

Beautiful


Re: Staved Mahogany Plant Pot

#6

Re: Staved Mahogany Plant Pot

Roger Chandler

Very nice! Love the color of that wood..........mahogany is one of my favorites.

Re: Staved Mahogany Plant Pot

#7

Re: Staved Mahogany Plant Pot

Grant Wilkinson

Jamie: Yup. By day's end, it will be full of dirt and plant. It's too small to be a hot tub, so I figured I would go with plant pot.

Tks, Roger. It does stain and finish well. I was lucky. A friend had a lot of off cuts left over from a big job. So, the price - nothing - was very right.

Re: Staved Mahogany Plant Pot

#8

Don Leydens

Re: Staved Mahogany Plant Pot

Don Leydens

very nice piece, Grant. That's a classy plant pot. Killer finish too.