Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

remote switch on PM4224

Posts

remote switch on PM4224

#1

remote switch on PM4224

George Scott

I purchased a PowerMatic 4224 about a year ago. I like the lathe a lot... quiet, smooth running, and powerful. Great for coring bowls and look forward to using it each day but......I am having a dickens of a time with the remote switch. I have gone through 4 of them and have the current one jumpered so that I can use the lathe.

I lost the first one a couple months after I received the lathe and when I called about my machine not running the tech knew what it was immediately and told me they were having problems with the switches. He sent me two....toggle switches (the original was a paddle). I went through those in about 6 months and called again....the tech sent me a new one and I request a paddle switch this time (I like that style better). He assured me the problem was solved. It went about a month ago and I have been running without the remote switch. Now I am having a great time reaching tech support.....they really eat up cell minutes ....I usually hang up after 10 or 15 minutes. I have left messages with my problem and they always tell me how important my call is, and how great their service is....they will call back in a day....yeah sure. Aren't large companies and institutions fun anymore. Anyone else having this problem?????

Re: remote switch on PM4224

#2

Mike Peace

Use a zip lock bag

Mike Peace

When I was researching making a remote switch for my 3520, I read that dust is a common killer of PM switches. One solution which I have used is put the switch in a zip lock bag and seal up to the cord. It does not look pretty but it sure keeps out the dust. I am using a Grizzly paddle switch for my remote switch with no problems

Re: remote switch on PM4224

#3

Re: remote switch on PM4224

Bill Howatt

I don't know what type your switches are but I remoted the On/Off pushbuttons which are the industrial type pushbuttons for my General 260. About once a year or so the lathe won't turn on and a quck blast of compressed air into the switch guts solves the problem.

Bill

Re: remote switch on PM4224

#4

Re: remote switch on PM4224

George Scott

Thanks guys, well I did a search of the archives...after the fact (that's when you are supposed to do it, right?) and see that this is not a new problem. Been going on for 6 years or more. It is not something that bothers me to distraction as I now seldom use the remote switch. I just think that if they are going to have a feature it should work reliably and that their service should be AOK..it ain't.

Thanks again for taking the time.

George

Re: remote switch on PM4224

#5

Ted Calver

Re: remote switch on PM4224

Ted Calver

I have a 4224 and experienced the same problem, I asked for and received a new switch and after a month, it also quit. Someone here posted instructions on how to take the switch apart and clean it, which I did. Dust is the culprit. Take the switch apart, clean it and put it in a ziplock as suggested above. Mine has been working perfectly for about eight years now...i needed it yesterday and was glad it worked :)

Re: remote switch on PM4224

#6

Re: remote switch on PM4224

RonBauer

I have had my 4224 for about four years. Had the same problem after a couple months, got a replacement it quit soon and I gave up. Never thought of the baggy. Will do that tonight. You are right. How do they not fix a problem that is six years old!!!!!

Re: remote switch on PM4224

#7

Phil Stivers

Re: remote switch on PM4224

Phil Stivers

When the mustard monster site was still around I gathered some cool tips. I removed the whole control unit and put it on a tether. Has worked well now for 4 yrs. My "powermatic remote" switch lasted two weeks before death, hence the replacement.