Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

multiple identical dowel turning tool

Posts

multiple identical dowel turning tool

#1

multiple identical dowel turning tool

Joseph Mulherin

I am asking if anyone kno0ws of how to make up an angle Iron cutting tool for use on the lathe

for making identical spindles? I once saw ( think it was on This Old house) where the guy ground the design into the angle iron, then mounted it on the tail end on the lathe and let the tool descend downb the material cut by its own weight....and when finished there was the spindle for the stairs.

If anyone knows of how to do this I would like to have the plans or method of doing so.

Re: multiple identical dowel turning tool

#2

Re: multiple identical dowel turning tool

Joe Herrmann

You are probably thinking of a back knife lathe. It is a specialized piece of equipment and I don't think there are attachments for retrofitting a standard wood lathe to do this. I took my students on a field trip to Ethan Allen Furniture in PA years back and they had several of these running. Pretty impressive to make an identical spindle in less than a minute!

Re: multiple identical dowel turning tool

#3

Re: multiple identical dowel turning tool

Joseph Mulherin

Thank you, Joe, I shall try to make contact with Ethan Allen and see what they can tell me.