Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Tool handles

Posts

Tool handles

#1

Dick Hines

Tool handles

dick hines

Here is a picture of the tool handles I made over the weekend. A friend drilled them but he did not have large enough size bits so I had to buy two drill bits.

The one on the left is drilled to fit a 1/2" tool. The middle is drilled for qa 5/8" tool and will be used with the Kelton coreing standard set. The handle on the right is drilled to fit 5/8" tools.

I have ordered the handle wrap from Woodturners catalog to wrap them.

Re: Tool handles

#2

Mike Stafford

Re: Tool handles

Mike Stafford

Dick, those are not made out of wood. I am not sure if you realize it but they are made from aluminium.....English pronunciation. Aluminum here in the U.S.

Re: Tool handles

#3

Dick Hines

Re: Tool handles

dick hines

Close enough.

Re: Tool handles

#4

Re: Tool handles

Lan Brady

Good Job Dick.

I hope they work well for you!

Lan

Re: Tool handles

#5

Dick Hines

Re: Tool handles

dick hines

They feel good. I will let you know how they are when I get the wrap on.

Re: Tool handles

#6

Re: Tool handles

Ron Bauer

Dick, Those do look nice. I aso make my own handles, albeit a little differently. Two comments, I bore both ends, usually with differant holes (i.e. 3/8 and 1/2 or 5/8) which essentially doubles your handle supply. Also the clear braided PVC tubing available from some of the industrial supply houses (like McMaster Carr or Grainger) make a great cover if the handle O.D. and the tubing I.D are compatible for a tight slip fit. Happy turning. Ron.

Re: Tool handles

#7

Steven Antonucci

Tennis racket grip?

steven antonucci

Easy, comfortable, long lasting...

S

Re: Tool handles

#8

Dick Hines

Re: Tool handles

dick hines

I looked at some tubeing for the handles but made them to big. The rods are 1 1/4" and with the tubeing they were going to be in the 2" range.

Re: Tool handles

#9

Aage Rendalen

What do the aluminum bars cost?

Aage Rendalen

Dick, where did you buy the aluminum (tubes?) and what's the price pr foot?

Re: Tool handles

#10

Dick Hines

Re: What do the aluminum bars cost?

dick hines

aage, I got the bars from www.speedymetal.com. The have rods and tubs. I got the rods because I could drill the to fit the tools. They have different knid os aluminum. I got the 6061 rods. I bought 36 inches and the postage was almost as much as the bars.

Speedy will cut the material amt length you want. The shipping may be cheaper if you get shorter pieces. Not sure about that though.