woodturning smock
Jeff Brockett
I am looking for a source to direct purchase lightweight woodturning smocks from. Don't need a logo or anything printed on the smock and prefer to purchase direct. Any help or suggestions would be appreciated.
Knowledge You Can Build On — Est. 1998
woodturning smock
Jeff Brockett
I am looking for a source to direct purchase lightweight woodturning smocks from. Don't need a logo or anything printed on the smock and prefer to purchase direct. Any help or suggestions would be appreciated.
Re: woodturning smock
Lan Brady
Try the army/navy surplus store.
They have an overshirt with a velcro neck.
Might not be as light as you want!
Good Luck, Lan
Re: woodturning smock
Harry Robinette
Try looking up Capt Eddie Castilin. He sales smocks that are unmarked I think.
Re: woodturning smock *LINK*
Rob Wallace
Jeff -
Have a look at the smocks that Rick Hutcheson sells - Link below.
Rob Wallace
Rick Hutcheson Smocks
Re: woodturning smock
Joe Fleming
I got the Craft Supplies camo smock. It is very light weight.
Re: woodturning smock
Jim H
I got mine from a lady at SWAT. it's very light weight and cool, the shavings just slide right off of it. I don't remember what I paid, but it was reasonable, and I'm cheap ;-)
Kay Leonard out of Tyler, TX
The number on the apron is 903-372-9056
Re: woodturning smock
dick hines
If you live close to an outlet mall check out some of the sporting goods stores. Some sell thin jackets "bike jackets" that are good.
Look at welding smocks?
steven antonucci
A buddy of mine uses a leather one. Works well.
Steve
Re: woodturning smock
Chuck Engstrom
Hi Jeff -- Go to your local Goodwill store and look for lightweight nylon windbreakers, which are usually plentiful. Buy two or three or more for a couple bucks each and try them out till you figure out which one you like best. You can hack off the sleeves for summer, etc etc, and you can even have different colors for different moods! Some may carry brand markings but chips fall off them plenty slick.
Tell your SO how much money you saved and use it to buy another turning tool!
Best -- Chuck