Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

50 cal. bullets pens w/o kit?

Posts

50 cal. bullets pens w/o kit?

#1

50 cal. bullets pens w/o kit?

Royce Meritt

There is a guy who is interested in having me make a few dozen 50 cal. bullet pens similar to the ones available in kit form from the various suppliers. However, he already owns a large number of the 50 cal. brass casings and would like to use them.

Is there a less expensive way to go aside from purchasing the 50 cal. bullet pen kits, discarding the casings from the kit and using his? Is there another type of pen kit that can be used? Would this save us any money? Or would it simply be more trouble than it's worth? For example, the 50 cal. kits can be bought from Penn State Ind. for $6.05 in quantities over 10.

I've made a lot of bullet pens in the 30 cal. size using slimline kits but this will be my first attempt at the 50 cal.

Thanks.

Re: 50 cal. bullets pens w/o kit?

#2

Re: 50 cal. bullets pens w/o kit?

Jeff Neff

I buy the slim line pens and then I turn the outside diameter of the 7mm pen to fit inside the 50 cal cartridge and expoy in place.

Re: 50 cal. bullets pens w/o kit?

#3

Ken Vaughan

Re: 50 cal. bullets pens w/o kit?

Ken Vaughan

I have done a few with 50 BMG cases.

There are a few tutorials around -- and this one from IAP is pretty comprehensive. BUT I am not overly excited about his use of tracer bullets.

http://content.penturners.org/library/pens/50BMG.pdf

I use non-lead (copper/brass) commercial bullets and drill them out as a general rule, and commercial full metal jacket bullets will also work. (Midway is one source).