On The Subject of Beads...
Wally Dickerman in Arizona
This piece is figured BL maple is about 10 inches tall and has about 60 beads. Done with my shopmade beading tool. 
Knowledge You Can Build On — Est. 1998
On The Subject of Beads...
Wally Dickerman in Arizona
This piece is figured BL maple is about 10 inches tall and has about 60 beads. Done with my shopmade beading tool. 
Re: On The Subject of Beads...
Harv
Wally nice vase. What kind of tool do you use and the size?
Re: On The Subject of Beads...
TomCollins
Maybe we can convince Wally to show us another picture of this tool. He has been very generous with photos of his beading tool in the past 
Come on Tom
Dave Peebles Lyons, Ohio
We all know that Wally buys his wood with the grooves already in it.
There is no such tool. 
Dave
Re: Come on Tom
Sam Scalzo
Dave,you are right. Wally will not show us his special tool so maybe he does not have one.
He won't even show our club the tool. Sam Scalzo
Wally just wants to make us drool over his work
Re: On The Subject of Beads...
Don Leydens
Very well done piece, Wally. I like it a lot!
Okay Okay..My Beading Tool....
Wally Dickerman in Arizona
I've given it a lot of thought and finally decided I should show the world my beading tool...You might have noticed that it's even left handed....
Re: Okay Okay..My Beading Tool....
Galen Vetterick
Well it looks like you may have gave away one good idea. Do I see a PVC tool post spacer to set the height just right for the beading tool???
Your "left handed" beading tool would not work on my little Jet 1220 anyway unless I try to put the belt on with a twist to run it backwards. 
Thanks Wally!!!!
TomCollins
I knew I could count on you to give us one more view.
TomC
Dave
TomCollins
Wally is the only one that seems to come up with wood that is pre-beaded. I find it just as illusive as his beading tool!
TomC
Re: Okay Okay..My Beading Tool....
Wally Dickerman in Arizona
Yep, I have pvc spacers for all of my tool rests. Always the correct height and it doesn't change when changing the rest angle. Some, like the one in the pic, are for special tools. I started doing this before pvc pipe was invented. I used water pipe and a hacksaw.
That Wally is a rascal!!!

Doh!
Mike Schwing from Maryland
Doh! I haven't been here in years. My first day back and I see that FINALLY the world famous Wally Dickerman tool has JUST BEEN UNVEILED for the world to see. What luck, I thought! I've got to see this thing that I clearly recall being a trade secret when last I was turning (almost 6 years ago, btw)
Only to be once again disappointed that the secret remains. Shame on you, Wally!
Re: Doh!
Wally Dickerman in Arizona
Mike!!!...Where have you been? Please visit us more often. Once in 5 years is not enough..
Sorry about the beading tool. In 9.4 years I'll be 100 years old. Then I'll pass on ALL of my turning secrets. If I have any left!!
Mike Schwing!!!
Don Orr
Wow-haven't seen that name in a long time-welcome back! Catch us up, man.
Any wild turned/carved sculptures lately?
Hey Mike, we've missed you! Are you.....
JamieDonaldson
...still doing the Iron Man thing?
Hi guys!
Mike Schwing from Maryland
Nice to see all the familiar names - some of you I see on FB regularly though.
I have not held a woodworking tool in years! After Mrs. Schwingding and I called it quits I moved into a home with nowhere to work. My turning/carving tools are all in a storage POD, but that is about to change. Moving soon to a new home where I can work! What I have been doing however, is drawing in my sketchbook so I have about 5 years worth of ideas to explore.
Still doing the whole swim, bike, run thing but mostly cycling nowadays as my body has been telling me 35 years of running is just about enough. Also picked up a couple of Harleys over the recent years, fun having a bike that I don't have to pedal for a change. I'll kick around here a bit until I get my shop back and running but I have a hard time being a lurker. See ya round!