Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

newbie

Posts

newbie

#1

newbie

jamie

Hi all, I was just wondering if any of you would be able to offer any insight to finding a woodturning instructor in the central wisconsin area? I've searched the web to the best of my ability without finding any real leads... I've inherited a lathe and would very much like to learn how to use it, but quite frankly, the prospect of using a high speed power tool only assisted by books, completely uneducated and unsupervised scares the bejeezus out of me. any advice you all have to offer would be greatly appreciated! thanks in advance :-)

Re: newbie

#2

Re: newbie

john Veerkamp

If you have a Woodcraft store in the area, they'll have classes and know people who might be willing to teach. Welcome to the arena of spinning wood.

Also contact AAW for members in your area.

Re: newbie

#3

Re: newbie

Rich Egan

Welcome to the turning world. We have a very active turning club in the Coulee Region Woodturners in La Crosse, and there are other clubs located around the state, so you should be able to find a turner near you. I think the AAW maintains a directory with contact information for various chapters.

Rich Egan

Re: newbie

#4

Wisconsin has turners all over Jamie, so....

JamieDonaldson

..it shouldn't be too hard to find one in the AAW Directory if you can access that info. BTW, you will have to be Jamie II and I'll be Jamie I !! :D ;)

Re: newbie

#5

Re: newbie

jamie

thank you both very much! as it turns out, there is an AAW chapter in my town, not entirely sure why it didn't pop up with my google search, but I was able to find it through the official aaw webpage. thanks very, very much! I can't wait to attend a meeting and start learning about this crazy looking tool :-)

Re: newbie

#6

Rob Wallace

You have done well, grasshopper....

Rob Wallace

.... but be careful, for you are about to step into the woodturning vortex, from which there is no way out!

Having a local mentor to watch you turn and help you with technique, design, and doing things safely is hard to beat. Joining the AAW and your local chapter will provide for that mentoring structure, and also will allow you to gain lots of support and inspiration for your journey through the woodturning experience. If you are an AAW member, I would encourage you to sign-up to receive the new Woodturning Fundamentals electronic newsletters, which can be done through the AAW web site.

Feel free to visit here or the AAW Forum very often, and don't be bashful about asking questions. There is a huge amount of collective knowledge, wisdom, and experience on these forums.... ... I have been turning for nearly 20 years, and I regularly learn something new here just by reading posts every day. It's a great supplement to reading, watching, and practicing woodturning.

Turn safely!

Rob Wallace

Re: newbie

#7

Re: You have done well, grasshopper....

jamie

i will certainly do that :-) thanks very much for the tip, I'm signing up as soon as I'm done typing this reply! i gotta say, I'm really impressed with the community atmosphere here... it's comforting to know as I play with 3000 RPMs I'll have at least a bit of mentoring in my pocket. i was a bit intimidated at the prospect of messing with expensive tools and exotic woods with absolutely no guidance... I'm also a musician, so my fingers are kinda important to me.. the thought of them getting bitten off by a spinning chunk of wood is pretty daunting lol

Re: newbie

#8

Re: newbie

Skip Beardsley

Hi Jamie,

Don't worry about messing up exotic woods. Visit any construction site in your area and ask for any available scraps. Scrap lumber is a wonderful way to play with the tools and learn what they will do without worrying about the cost of the wood.

When I get a new person in our club I start with a 2x4 or 4x4. Learn how to cut the pieces square and how to mark the centers of each end so you can turn between centers. Next is to practice making a square piece into a round spindle.

Once you are there there are lots of utube videos to give you some ideas on things to practice on.

The most important things to get help with, in my opinion, is how tell when a tool is sharp or dull, and how to sharpen the tools to give good performance.

Good luck,

Skip

Re: newbie

#9

JamieII, don't crank that lathe up .....

JamieDonaldson

...to anywhere near 3K rpm!! I see you're a Fender electric JamieII, and I'm a Guild acoustic JamieI. ;)

Re: newbie

#10

Re: newbie

jamie

any advice on a good brand of tools or tool sharpeners?

Re: newbie

#11

Re: JamieII, don't crank that lathe up .....

jamie

oh no worries, I haven't even turned the thing on yet, much less touched any settings.

but yes, I'm a fender girl, but i also play Luna electric/acoustics in my solo act. on that note, my stage name is J-me, so maybe I'll use that handle instead of JamieII ;-)

I have delusions of grandeur that someday I'll use this lathe to make custom, exotic wood bridge pins with pretty abalone inlays :-D

Re: newbie

#12

Lyle Jamieson

Re: newbie

Lyle Jamieson

Welcome Jamie, I could be a Jamie too, but that's my brother.

I will be doing a two day demonstration followed by hands-on classes in Milwaukee, March 17-20, 2012. The last I heard they had room in the class for another student. The Milwaukee Woodturning Club meets in the Woodcraft store there. MAWTURNERS.COM

Re: newbie

#13

How strange that you would say......

JamieDonaldson

...that about the bridge pegs, as I made a set from ebony with abalone insets for my 6 string years ago! Piece of cake on a lathe, but I never got around to making a set for my 12 string??!!:D

Re: newbie

#14

great minds think alike, no? 


Re: newbie

#15

Re: newbie

Skip Beardsley

As far as sharpeners go, I am a fan of the One way Wolverine system with the Vari grind jig. ( One Way Manufacturing in Canada. Available from Craft Supplies ) It is soooo.... important to learn how to sharpen, tools in order to be a good turner. This system is easy to understand and gives repeatable grinds every time. I hope you are able to connect with a club and find someone to mentor you. As far as a grinder in concerned, I like eight inch slow speed but if there is a six inch one around certainly use it.

I have made most of my tools so don't have much experience with store bought tools. Russ Fairfield, who used to be a contributer here, he has since passed away, told me that in his opinion the Benjamin's Best Brand was a good place to start. The eight piece set will give all the basic tools and they are not too expensive, so not much to loose. Available at Penn State Industries. I think it depends on what you plan to turn. As far a bowl gouges go I feel you can't do any better than Doug Thompson tools. I have two of them and am about to buy at least two more.

I would suggest you search through the archives here for information about your concerns and interests. Most of the questions you have have been discussed here and in the articles.

Happy to have you in the turning community. Just remember... be safe and wear a face shield, at the least.

Skip

Re: newbie

#16

Re: newbie

Robert Stavran

Greetings Jamie,

I am a central WI turner. Send me an email and we can get together.

Check out our website: http://www.wisconsinvalleywoodturners.org/

Bob

Rjstavran@yahoo.com

Re: newbie

#17

Re: newbie

eliotandmax

Glad that you're diving in. And you're right not to do so without some instruction. I remember that, like the fool I was, I just went out and got a video and started. What a mistake! The video happened to be one by a famous expert with a skew chisel. So I thought I would try it.( A skew chisel, yet!) I bought a skew chisel( a good one it turned out) and began, trying to copy the guy in the video. I didn't get hurt, but when I put the tool to the wood, nothing happened! No cutting! I tried all kinds of angles. It just wouldn't cut. The problem turned out to be a dull tool. I simply had no idea of what a sharp tool was; I really had never seen one. So the best thing is to do what you're doing and find an instructor or a club and start slowly. After a while, you're wonder what was so hard about it. Good luck!

Re: newbie

#18

Re: newbie

George Van Beynen

Glad you caught this Bob, I was going to recommend your Wausau group also.