skew sharpening video *LINK*
John Lucas
I was looking at my video numbers which are up to 41,000 views now. Each sharpening video has double what the others have so I thought I should do some more.
http://www.youtube.com/watch?v=MJYNLkPh_LM
Knowledge You Can Build On — Est. 1998
skew sharpening video *LINK*
John Lucas
I was looking at my video numbers which are up to 41,000 views now. Each sharpening video has double what the others have so I thought I should do some more.
http://www.youtube.com/watch?v=MJYNLkPh_LM
Re: skew sharpening video
Bill Turpin in WNC mountains
link doesn't work for me
Think I got it-try again
Best thing you can do.
Galen Vetterick
When your viewing John's YouTube video is hit the suscribe button and you will get an email and link right to John's latest video.
I sure subscribed to the John Lucas Productions as the information is well presented every single time!
I made the skew fixture some time back but since I had no way to mill the oneway platform I put a wood strip on the lower edge, which requires me to also insure I am pushing the jug up to the platform. DAH! the thinner strip on the top side is the way to go. Maybe even both edges so it is capture and only need to worry about travel in the back and forth direction.
Another good one John!
I need to look up to see what the Thompson skew thickness is as it looks thicker than my generic one.
Re: Best thing you can do.
Gary Asbury
The link opened right up. Excellent video. Learned a few good tricks.
Re: skew sharpening video
robo hippy
I am not a skew guy, but can fake it some what. I also experimented with the Eli Avesera (spell?) which has a convex bevel. I found it great for coves, and concave curves on spindles, but much more difficult to go straight with, like on rolling pins.
robo hippy
it opens right up for me...
another excellent Lucas Video!
Re: skew sharpening video
Leo Cuellar
Thanks, John, another good one! Learned something too, I don't think I've ever thought about dressing the back of the heel & toe.
Re: skew sharpening video
John Lucas
Reed I'm still learning with it. I find it harder to turn beads. I couldn't tell much difference on flat surfaces and it seems easier on coves. I haven't used it enough to really know it yet. I'm planning a day where I just practice with all my skews switching from one to the other.
Re: skew sharpening video
John Lucas
I learned that from Nick Cook maybe 100 years ago. At least it seems that way. Nick is an expert with the skew.
Re: skew sharpening video
Hal Taylor
Thank you John for another excellent video tutorial. Your best take home for me was your jig. Thanks again.
Another good video John
Re: skew sharpening video
Bill Turpin in WNC mountains
Works this morning. Good video John.
Re: skew sharpening video
Phil Powell
John, good stuff here! This morning I went out to the shop and built me a jig like yours, thanks.
Re: skew sharpening video
Keith Tompkins
John, just think if you charged just one buck for a subscription.... 
Nice Job John-Thanks!
Re: Anothe great one and a request.....
Jesper, Denmark
I have looked for a video for demystifying shearscraping - but not found one. If you could put that on a wishlist, John, that would be great.
Re: Anothe great one and a request.....
John Lucas
That is on my todo list but I think it needs to go on the top of the list. I might have time later this week while I'm working on a platter project.
Very informative, Thanks!
Re: Anothe great one and a request.....
Jesper, Denmark
I will be looking forward to that. You have a way with making the concepts very clear and simple, and there is a LOT of confusion around about shearscraping.