I've been working on another Genie bottle. I'm doing this one with the yellow heart installed on the base so I can get the curves better but that means I have to hollow it out by making a custom jig to hold it. I designed one in my head this morning and will go out and build it. It probably doesn't have to be hollow but I'm going to have to ask a lot of money for these so I need to do all I can to make it a special piece. I also made a custom beading tool for the mini beads. I'll show that later.
I made this collet chuck to hold the upper finial of the Genie bottle. I made the hole in the bottom the same size as the top of the final and as deep as the finial. Then I hollowed out the near end to slightly larger than the threaded end of the finial. I cut slots in the wood so it would compress. I installed a hose clamp to compress it. After I installed the finial and tightened it down it was quite easy to hollow out the inside of the finial.
It looks like one of those times when you do not want to get rid of the pip at the bottom of the collet chuck from hollowing. It would help center the bottle top so that it spins on axis.