Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

mini spinning tops

Posts

mini spinning tops

#1

mini spinning tops

John Lucas

I was asked to make some mini spinning tops so I did that last night. I didn't go really small with these. They are made from ebony. I used my 1/16" skew for the smaller ones.

Re: mini spinning tops

#2

Re: mini spinning tops

L

John those are some great looking Tops that you've got turned there, but with the size of a persons fingers being what they are, how the heck is someone supposed to actually spin any of them?lol You must really have a hard time throwing any size piece of wood out, that is judging from the size of these fellers. Thanks for letting us have a look at them.

L

Re: mini spinning tops

#3

Re: mini spinning tops

John Lucas

The two big ones will spin. The smaller ones obviously are just for show. I talked to a guy who makes custom smoking pipes the other day and he showed me a piece. I showed him my Genie bottle that I had with me and he asked if I had any scraps. I told him I don't have any scraps that aren't useful but will bring him a piece or so. I'm going to take my miniature goblets in along with the wood and show him that I can get 20 or 30 pieces out of that 1" square block I'm bringing him. Actually I'm going to take more than that. He uses them as accent pieces and only needs about 3/4" square.

Re: mini spinning tops

#4

mini spinning tops - Demo

jake Niedling

John - I would like to see the details of your cuts and tool control for the tinest of your tops. Do you do the wood turners dance when you make your cuts? Especially showing us how you rub the bevel. Do you have a little camera that can get in that close to show us the little top being made? :D :b

Re: mini spinning tops

#5

Now that would be a challenge.

John Lucas

If I can find a way to attach my camera to the microscope I could feasibly do a video and use the camera monitor to view the cut. It would be like a surgeon operating by watching a monitor. I'll see what I can find. I've helped one of our Biology professors with his camera. Maybe he'll have an adaptor or no where to get one.