Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

making my own innerface pads

Posts

making my own innerface pads

#1

making my own innerface pads

Ryan

I'm looking for a source of medium to firm density foam for making my own innerface sanding pads. I think there was a discussion about it sometime back but I can't find it in a search. Can someone point me in the right direction?

Thanks

Re: making my own innerface pads

#2

Steve Kubien

Re: making my own innerface pads

Steve Kubien

How about the foam used in kids crafts? Our Michaels has it close to 8-1/2"x 11" sheets with PSA on one side. I haven't tried it so I am not sure how it will work.

Re: making my own innerface pads

#3

Re: making my own innerface pads

George Van Beynen

I used an old closed cell camping mattress, worked great. I've seen some swimming mats that look similar at Walmart that were cheap.

Re: making my own innerface pads

#4

Re: making my own innerface pads

Stuart Johnson

I use this stuff with my vacuum chuck but I don't think it would hold up for sanding.

Re: making my own innerface pads

#5

Re: making my own innerface pads

Peter Hyde

Foam kneeling pads for gardening. In Walmart and most garden centres. Lots of variety for different density.

Re: making my own innerface pads

#6

Re: making my own innerface pads

Roger

Go to www.fredwilliamson.com. Check out the whole site but specifically the making a sanding pad section under methods of work. It's inexpensive and works great.

Re: making my own innerface pads

#7

Computer mouse pads?


Re: making my own innerface pads

#8

Thanks everyone!