Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Dust collector thingie

Posts

Dust collector thingie

#1

Dick Hines

Dust collector thingie

dick hines

Here is what you can do with three knobs, a few T-nuts and some scrap board and a few dry wall screws.

I have had my dust collector pipe hanging on a rod off the head stock. it works good with hollow forms and bowls but not so good with small turnings. I could not get close enough to the work to collect what I thought was enough dust.

So I took a bout a hour today and built this. It will lay flat to the wall or reach all the way on the front of the head stock.

Re: Dust collector thingie

#2

Re: Dust collector thingie

Jeff Willaford

Nice job, Dick. Mine is a lot like that but without the fancy knobs or the custom intake.

Re: Dust collector thingie

#3

Dick Hines

Re: Dust collector thingie

dick hines

The custom :( intake is where I found the bottom of a bowl.

Re: Dust collector thingie

#4

Re: Dust collector thingie

Lewis Dodd

With your permission, think I'll copy that! My design has never pleased me///I

might try to incorporate as vertical adjustment....

Re: Dust collector thingie

#5

another version Dust collector thingie

Jeff Willaford

Not as finessed as Dick's version but vertical adjustment built in via Rockler Flex form. Washers brazed vertically to bolts to substitute as knobs.

Re: Dust collector thingie

#6

Mike Mills

Re: Dust collector thingie

Mike Mills

Looks good. That should get it up closed.

I saw a similar arm where there was a small rack to hold 4-6 tools in use, could be pulled out handy or folded away.

My dust collection thing used about the same amount of wood, tee-nuts, and same type knobs. It does look and work completely differently as it also has some steel tube, Velcro, and a file folder.

Re: Dust collector thingie

#7

Dick Hines

Re: Dust collector thingie

dick hines

Copy away Lewis. If you have any questions get intouch with me.

Re: Dust collector thingie

#8

Re: Dust collector thingie

eliotandmax

For anyone who has a Powermatic 3520A (probably for the B too) there's a bracket that holds a rod that is supplied to attach a kind of safety screen. This rod can be slid parallel to the lathe bed, and whatever you attach to it can be rotated around the rod towards and away from the lathe bed. I doubt most owners use it for a safety screen; I don't. But it makes a good place to attach something like what you are showing here. My primary point is that for Powermatic owners most of the work has been done for you, if you want to fashion some kind of dust extraction unit.

Re: Dust collector thingie

#9

Dick Hines

Re: Dust collector thingie

dick hines

I used the colector today. It works great. I can get the inlet rught up to a piece being sanding and collected more dust than I was getting when I had the inlet attached to the headstock.

It wil even catch chips. Not all but any is better than nothing. And it swings out of the way when not inuse.

Re: Dust collector thingie

#10

Mike Stafford

Re: Dust collector thingie

Mike Stafford

Great idea, Dick.

I think I have several custom intakes cones where I found the bottom of various shaped bowls and maybe even a box or two..... :(

Best use of a finely crafted funnel I have seen lately. :D

Re: Dust collector thingie

#11

Dick Hines

Re: Dust collector thingie

dick hines

It's not like me to toss out a perfectly good bowl.

Re: Dust collector thingie

#12

Re: Dust collector thingie

Lewis Dodd

Hey Dick--made the "dust collector thingie" yesterday, haven't had the opportunity to use it yet--sure works better than my old setup...looks like I may have to pull the lathe away from the wall a bit to get proper use, the hose limits my usage right now...Thanks for thinking of this!

regards,

Lewis

Re: Dust collector thingie

#13

Dick Hines

Re: Dust collector thingie

dick hines

Hope it works for you Lewis. I am not taking any credit for this design. I have looked at a bunch of ideas over the years, and had some free time to put all the ideas together.