Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Betty did it again...

Posts

Betty did it again...

#1

Betty did it again...

GaryG in MD

Got my new American Woodturner in the mail today.

Another "best issue ever!" Lots of great articles.

Betty, I don't know how you keep doing it, but keep it up!

...Gary

Re: Betty did it again...

#2

Re: Betty did it again...

Dale Bonertz

She is a jewel. Great job Betty.

Re: Betty did it again...

#3

Re: Betty did it again...

Barbara Dill

Not only are the articles intriguing, but I just put water into my oil finish, and, sure enough, the water sank to the bottom and the can is now full. NO more wine saver stuff and no more hard finish!!!!!! Great job, Betty.

Re: Betty did it again...

#4

Re: Betty did it again...

John Lucas

The tips page is as far as I've gotten so far. Can't wait to try that. Looking forward to Peter Rand's article. I've been following his work and love it.

Re: Betty did it again...

#5

Re: Betty did it again...

Carole Valentine

Dang...mine's still sitting on the kitchen table. Going to go get it and settle into my LazyBoy!

Re: Betty did it again...

#6

Re: Betty did it again...

clay foster

The mailman isn't through reading our copy, but I know it will be good. Betty is the best editor the Journal has ever had.

Re: Betty did it again...

#7

Re: Betty did it again...

Hal Taylor

To often the most vocal are the detractors so it's good to see kudos for a job well done. I got my issue a couple days ago and have briefly looked at it. Great issue - as usual. Thanks Betty for doing a fantastic, often thankless, job!

Re: Betty did it again...

#8

Re: Betty did it again...

dick gerard

Betty's work is always first class, as is she. I often hear how the Journal doesn't have anything in it of interest to the "non-artsy" folks. I always find something of interest in each and every Journal, whether its technical, projects, how to, or the "artsy" stuff. In my opinion, the Journal just keeps getting better and better and better with each issue. It is like a smorgasboard for turners.

Keep up the GREAT work Betty!

Re: Betty did it again...

#9

Betty Scarpino

Re: Betty did it again...

Betty Scarpino

I sincerely appreciate the positive comments, thank you all!

I could not do this without the many woodturners who generously share their knowledge. Sure, we pay authors for their articles, but it's hard work putting together an article and the pay does not cover the entire time involved.

On the "good-news front," in early January, the AAW Board approved my proposal to increase the journal to 80 pages and also allocated money to hire part-time editorial help. This will happen with the June issue. There's just a lot of great articles that have yet to be published and I keep receiving more every month. I have a backlog, but even so, anyone who has an idea to share, let me know.

So, thank you to all of the authors out there!

Re: Betty did it again...

#10

Not so sure

Ricc havens

I'm not so sure she did a good job. Oh, wait - maybe that's because I don't have the money right now for a membership (CRAP- I hate disability income!!) and Betty hasn't sent me a free copy yet :):) So, I will have to wait and reserve judgement for when I can thumb thru it at Barnes & Noble as long as they don't run out of copies before I get there :):)

Envious of you guys!!!

Ricc Havens

Elkhart, IN

Re: Betty did it again...

#11

Betty Scarpino

Re: Tears aplenty!

Betty Scarpino

Okay Ricc, there's not a dry eye in the entire WoodCentral audience .... I have a few extra journals, so I'll send you one. Send me a PM at editorscarpino@woodturner.org with your mailing address and I'll send you a comp copy (you're obviously not in the AAW directory ....).

Don't anyone else come up with the same idea (or even a different one)!

Re: Betty did it again...

#12

Re: Tears aplenty!

Lan Brady

To Ricc and Betty,

LOL, What a great sense of humor you guys have.

Thanks for making my afternoon brighter!

Lan

Re: Betty did it again...

#13

Re: Tears aplenty!

Ricc havens

Thanks for the offer Betty and I will take you up on the offer as alot of times the local B&Noble is out so I miss thumbing thru it. I wasn't trying bring you to tears I was just trying to have some fun as I am bored at work!

But, if that worked with you I wonder if I can use the same lines and get that Robust Lathe free sample :):):)

I did see last months issue and really enjoyed it!!

Thanks

Ricc

Re: Betty did it again...

#14

Keith Tompkins

Re: Betty did it again...

Keith Tompkins

I agree.... Betty is doing a super job on the Journal...I don't know where she finds the time! I think the next issue is gonna' be a good one too! :D

Re: Betty did it again...

#15

Re: Betty did it again...

Wally Dickerman in Arizona

Yep...Betty's the best! Also, A lovely lady...

I have every issue of the journal. The first few issues were mimeographed newsletters.

I'll bet a lot of you young folks don't even know what a mimeograph is...or was. But then you wouldn't know how to drive a model T Ford either! :b

Re: Betty did it again...

#16

Re: Betty did it again...

John Lucas

Mimeograph yes but you've got me on the Model T. Heck the new kids on the block don't even know what carbon paper is. Or for that matter dial telephones, or typewriters.

Re: Betty did it again...

#17

Re: Betty did it again...

Wally Dickerman in Arizona

Welll, a Model T had 3 foot pedals, 2 levers on the steering post, a choke wire by the handcrank. If you didn't know how to use those you'd probably break a thumb or a wrist when handcranking the car. Self starters didn't come out untile the Model T had been made for 15 years.

The kids here won't remember glass milk bottles, Brownie box cameras, or cars with running boards either.

Re: Betty did it again...

#18

Re: Betty did it again...

John Lucas

I also remember when aluminum garbage cans came out. I was little and those steel garbage cans were really heavy when I had to haul them to the curb.

I also remember when the potato chip guy delivered as well as the milkman.

I do remember starter buttons on the floor of the cars and 50cc Moped motorcycles that had bicycle pedals.

Re: Betty did it again...

#19

What do you have coming up in it, Keith?


Re: Betty did it again...

#20

I do, Wally...

GaryG in MD

When I was a kid, my Dad had a '22 Model T pickup. He let me drive it when I got "old enough". I still remember it. Spark on one side and throttle on the other. The pedals were "hi/low", "reverse", and brake. That crank was an arm breaker. He would never let me do it. The cooling system was atmospheric pressure, so when it sprung a leak, he just stuck a pencil in the hole as a temporary repair. He also welded a 12" pipe to on rear wheel and used it as a winch to pull his boat out of the water. Do not try this at home! ...Gary

Re: Betty did it again...

#21

Heck, Running Boards and

John Kaner

a Chicago Typewriter, helped create the Original drive by shooting...

My buddy grew up in Berwyn, a suburb of Chicago. You could see the pockmarks left in the brownstones, all in a neat row...

Re: Betty did it again...

#22

Or floppie disks!

Jorge

and that is more recent

Re: Betty did it again...

#23

Bygone things

Jorge

Also the headlamps switch from high to low beams also on the floor and another bygone car feature, remember the Studebaker that to stay put on a climb as soon as you stopped, you depress the clutch all the way! counter intuitive...

Re: Betty did it again...

#24

Re: Heck, Running Boards and

Lan Brady

All the remiminising is fun but dont make fun of the kids!

Without them, I would not know how to write this response.

I suspect, neither would anyone else here!!!!

LOL, Lan

Re: Betty did it again...

#25

Re: Betty did it again...

George Van Beynen

I can still remember the smell of the ink when I was occasionally hauled to the "office" to see the Principal. :)