Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Just a little turning

Posts

Just a little turning

#1

Just a little turning

John Lucas

More repair work. I built 8 walnut veneer corner molding pieces, 2 flat molding pieces, 2 Walnut veneer back panels, and started the repair of the part cabinet of which I had to build one drawer, repair another and make 8 knobs. Helps pay the bills but is a pain in the butt to do. Now I've got to match the finish on the drawers and knobs which will be challenging.

Re: Just a little turning

#2

Tony Reynolds

Re: Just a little turning

Tony Reynolds

Nice job John. You've been busy! I hate matching finishes, it's always a challenge for me.

Re: Just a little turning

#3

Re: Just a little turning

Randy Gleckler

Looking good though John. Nice cabinet..

Re: Just a little turning

#4

Re: Just a little turning

Sam Scalzo

Nice job John.I have done some repair work for people. It is always a challenge.

Sam

Re: Just a little turning

#5

Jim DeLaney, Austintown, Ohio

Re: Just a little turning

Jim DeLaney, Austintown, Ohio

For matching the finish, I'd start with either button or garnet shellac, and maybe add a drop or two of Transtint® orange or golden brown dye.

Test on scrap pieces first, of course...

Re: Just a little turning

#6

Re: Just a little turning

Jorge

Good work John.

That cabinet would be a great place t store gazillion rose engine cutters.

Re: Just a little turning

#7

Nice Work John

Don Orr

Please show us the finished piece when you're done.

Re: Just a little turning

#8

Re: Just a little turning

john lucas

Jim I usually dye first and sometimes a few more times until I get close. Then I add dye to the finish to fine tune if necessary. In this case I'll probably also add some dirt as well. :)

Re: Just a little turning

#9

Jim DeLaney, Austintown, Ohio

Re: Just a little turning

Jim DeLaney, Austintown, Ohio

In this case I'll probably also add some dirt as well.

Yeah, I've done that, too. Sometimes a little mud, or some dust and floor sweepings, wiped onto/into the finish five the needed patine.

So far as the dyes, I like to dye the wood close to what I want, then use the tinted shellac (or sometimes, lacquer) to do the final matching/toning.