I'm needing to buy Anchorseal again and I remember some time back there was a discussion about the differences between the classic version and Anchorseal 2. Couldn't find the discussion in a search and wondered what the difference was between the two. I'm using it to seal the end grain on my roughed out bowls as well as larger logs. I'd also appreciate any input from someone who knows if I can get it (affordably) in Canada in a gallon size- other than at LV who are hugely expensive. It's not economic to have it sent here from south of the border.
You might want to contact the manufacturer, UC Coatings, directly to see how they deal with international sales. It seems there are "Bates" distributors throughout Canada (See the link below) that likely carry Anchorseal. You could try contacting the closest distributor to see what the Anchorseal story is in the Great White North.
I have heard that the 'new' version of Anchorseal differs somewhat in viscosity and sealing properties, although I do not know what the actual data are. Some of the reports on the new formulation were not flattering for woodturning applications.
I order a 55 gallon drum about every other year directly from UC Coatings, and avoided getting the new formulation. They still sell the 'classic' version of Anchorseal, and this is the Anchorseal product I get for our woodturners chapter (I also buy the "winterized" mix, which has alcohol added to it to reduce the likelihood of freezing if kept in very cold conditions. It is worth the relatively small extra cost.).
You could also give the customer service dept. at UC Coatings a call [1-888-END-COAT (363-2628) ] - they have always had a very helpful and friendly person take my calls and help me place my order each time I've dealt with them. They do cater to woodturners, and know that this is an important, albeit secondary, market for them.
Latex paint works well and you can purchase mis-tinted top quality paint from Lowe's or Home Depot for $5 per gallon (if not in the mistake section, these paints would be $20-30 a gallon).
My clubs last two 55 gallon drum purchases have been of the new formulation. I see no difference in the results. Sealing with Anchor Seal does not guarantee a crack free piece of wood. You get 95% less cracking than using no sealer.
Thanks Rob, that was the sort of information I was looking for. Not interested in using latex paint, I'm looking for something that I can depend on not necessarily the cheapest route. I've used Anchorseal (LV version) and know the results I get.