Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Burn Barrel Resurrection #6

Posts

Burn Barrel Resurrection #6

#1

Burn Barrel Resurrection #6

Dick Wilson

I have been a huge fan of MICHAEL and CYNTHIA GIBSON since I first saw their marvelous tea pots. I had a Flowering Pear turning laying on my bench for a year that, as you can see, went south on me big time (first picture). After doing this piece my admiration of Michael and Cynthia's work has taken quantum leaps. These suckers are a ton of work. As I said before, the HF is Flowering pear and the spout, handle, and top are Walnut. I thought about overlapping the leaves and decided not to. I wanted natural wood in between the leaves. I like the look. As far as the spout and handle.....the jury is out. When I was tweeking the design I thought it looked great. AFTER it was all glued together and finished I wish I had done it a little differently. I think I would have had the walnut touching the HF further up and then curve out. Another design flaw that Michael pointed out was that theoreticly if you filled the pot to the top the tea would be spewing out the spout because it is not high enough :( :( :( The pyro work I do will NEVER be confused with Cynthia's artistry. Different tips and lots of practice is definately needed. Piece stands 10" tall by 12" across. All in all, not a bad first stab. Comments and critiques welcome.

Re: Burn Barrel Resurrection #6

#2

Re: Burn Barrel Resurrection #6

bob davis

that is very nice....

Re: Burn Barrel Resurrection #6

#3

Great Save..........

jake Niedling

You did a wonderful job saving this piece.

Re: Burn Barrel Resurrection #6

#4

Re: Burn Barrel Resurrection #6

Randy Gleckler

Nice work sir, Looks great and great that you could save it.