Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Turning videop system help

Posts

Turning videop system help

#1

Dick Hines

Turning videop system help

dick hines

My club is in the process for upgradeing our video system and I am looking for suggestions. Right now we have two flat screen TVs and two cameras that can be swtiched so that the views are different or the same.

We are thinking a third camera on a boom.

I know there some clubs that have some great systems. Any suggestions?

Instead of posting suggestions e-mail me.

Re: Turning videop system help

#2

Re: Turning videop system help

john lucas

I will have to draw the boom I saw this weekend. My card that had all the photos died and would not let me download them. first time I've had that happen. The Boom arm that Mike Zinzer designed is fantastic. I will sketch it out when I get home tonight and post it.

Re: Turning videop system help

#3

Re: Turning videop system help

Barbara Dill

Thanks!!

Re: Turning videop system help

#4

Lyle Jamieson

Re: Turning videop system help

Lyle Jamieson

I prefer to have a camera with a zoom capability on a tripod. The stationary cameras never seem to be in just the right spot. But I also direct the cameraman throughout the demo for the best angle and view for the participants. He is on the move constantly to get the best shot.

Re: Turning videop system help

#5

Re: Turning videop system help

John Lucas

Dick and Barbara. Here is a very crude sketch of the Boom Arm. I talked to Mike tonight and he has drawings and photos he's going to send me. He's also working on an improvement and may have it done by next week to bring to the club meeting.

I certainly agree with Lyle. The camera should be mobile and that's what Mike is trying to do. The problem with holding the camera or even holding a tripod close to the demonstrator is that it's hard to stay out of everyones way and still get the video. This boom arm should help that. Mike and I discussed several options for improving the videos and will look into it over the next few months. As everyone knows, video of demonstrators is a tough job and quite often done poorly due to either neglect by the person running the camera, the quality of the equipment, or all of the above. We are going to try and work on that so that next years TAW symposium will have some sort of system so that everyone in the room can see the monitors and the camera can be placed in such a way to give the best view.

Mike and I also discussed ways of training camera operators. We think that if you the system up at club meetings and have people run the cameras who will be volunteer operators at the symposium, they can practice under a much less tense atmosphere. We can then discuss with them ways of doing it better.

Anyway I'll talk about that later. Here's the sketch. You push on the top lever and it moves the top of the camera platform forward so that the camera tilts down. Pull back and the camera tilts up. You know how a demonstrator leans over when turning the inside of a bowl and gets his or her arm in the photo so you can't see in. With this system I simply moved the boom arm to the right and in closer. Tilted the camera down and had a perfect image of the tool doing the cutting. To do this with a camera on a regular tripod I would be blocking the view of most of the right side of the room.

I'll post the photos and drawings after Mike sends them to me.

Re: Turning videop system help

#6

Sony industrial camera *LINK*

Mike Brazeau

Sony's industrial division have a camea that is operated with a joystick. Would love to be able to get my hands on one to try for overhead shots during demonstrations.


EVID 100 Camera

Re: Turning videop system help

#7

Re: Sony industrial camera

Lloyd in Mississauga

It would also be nice if you had multiple camera's, that you could either do a picture in picture on the screen to know when to switch to the other camera for a better look see, or have an small screen that could be used by someone to switch between the camera's for the better view for the audience.

Having multiple camera's and not knowing what you are going to switch to is another down fall.

Lloyd

Re: Turning videop system help

#8

remote pan tilt *LINK*

John Lucas

I don't have time to check this out this morning and will be out of the office all day. I'll look at some of them this weekend. The Dalton club had some of the Radio Shack N10 (I think that's the number) remotes for their small cameras and they seemed to work well.


http://www.21best.com/21_best/electronic/security/video/pan_tilt/for_sale_.html

Re: Turning videop system help

#9

I wrote a how-to for building that boom....

JamieDonaldson

...that was published in the AAW Journal Summer of 2008. It's very functional and phrugal to build, and if I knew how to do it could post the PDF I have on my computer?

Re: Turning videop system help

#10

Re: Turning videop system help

clay foster

Something the Asheville club has that is very helpful is a little tv sitting low in front of the lathe for the demonstrator to see what the audience is seeing. AS a demonstrator, you barely have to raise their eyes to see it, and it's still in your peripheral vision when you are looking at the turning.

Re: Turning videop system help

#11

Re: Turning videop system help

Jeff Brockett

See the new posting titled TAW symposium camera boom. We have put photos, materials list and instructions for building one there.