new mirror
john lucas
I'm going to start on some more advance mirrors to increase my challenges. This one is mahagony. The unpainted detail on both pieces was turned off center on an 18" disc. Mounting the handle was interesting and it barely cleared the bed on my 20" lathe.
After the lines were turned I carved away the rest of the material. It was painted an off red and the painted again with black. Then I used steel wool to polish off some of the black to let the red show through.
The handle is attached with a mortise and tenon joint. I carved a tenon on the handle and the routed a groove in the mirror body.
From a design point there are several things I would do differently. I don't think the grooves were the best design. Possibly small beads would work better. I need to make the your eye flow through the elements better. I like the wrap around handle but at certain angles the top part looks like a snake head and I don't want that. I textured the body but think I'll leave the next one as nice figured wood.




