Bet most of you haven't seen this?
steven antonucci
Check out the way he cuts!
Steve
Knowledge You Can Build On — Est. 1998
Bet most of you haven't seen this?
steven antonucci
Check out the way he cuts!
Steve
Re: Bet most of you haven't seen this?
matt overton
That's different. The cat still got skinned.
Man, he really moves the wood!
GaryG in MD
The first tool is a classic, "historic" hook tool.
Only they aren't so old fashioned. I bought two in St. Paul (Hosaluk and Martel -- very different shapes) that I want to get around to trying out. Alan Lacer demos how to make them from a hunk of metal with a MAPP torch.
With the "traditional" gouge grind, I was waiting for those points to catch, but they didn't. That, in itself, is a lesson.
Who is the guy? He's almost as fast as Glenn Lucas! He really makes short work of that wood. Great ribbons!
...Gary
Nice tool rest adjuster...
John Kaner
Kinda don't get mad, get a hammer... 
Re: Bet most of you haven't seen this?
Don Orr
I'm guessing he is Japanese. The hook tool is being used in a fairly traditional undercut position. He's pretty good with the "western" tools also.
Re: Bet most of you haven't seen this?
Dick Coers
What's that shoulder cut he makes on the inside? Jamb chuck?
I wondered why he did that too?
Re: Bet most of you haven't seen this?
eliotandmax
He's clearly a fine turner. But I really don't see any advantage to using that underhand method. The problem, it seems to me, is that the tool hangs way too far over the rest than it needs to be.
Re: Bet most of you haven't seen this?
Bill White
Just goes ta show ya that there are no "absolutes" in turning. I've been tryin' to find a STANDARD grind on skews/gouges. HA!!!!
Whatever works is good for me.
Bill
Re: STANDARD grinds?
Jim Breeden
Me to! I've read all the books, seen all the videos, and whatever works for me is just fine. 
Re: Bet most of you haven't seen this?
Jim Breeden
OOPS to BIll - Ment to say I saw the link that Steven has! 
Re: Bet most of you haven't seen this?
Barry L Elder
I've always been taught that the "standard" grind for skews and gouges is whatever work for you, the individual!
Re: Bet most of you haven't seen this?
robo hippy
First, I would guess that it is a really soft wood. You can't cut sugar maple or osage like that no matter what tool you are using.
I would guess with the hook tool, he is working from the bottom up, because if he were more on the side like with standard tools, the tool handle would be over on the other side of the lathe, which would only work on a short bed lathe, not long bed where you would have to hang over.
I am guessing that the shoulder inside the bowl would be for a jam chuck.
I really need to experiment with hook tools, but don't have the metal working skills to make one.
robo hippy