Couple new maple bowls from crotchwood
Chris Groves
I turned a few bowls from some maple crotchwood I collected on Cape Cod last fall. Interesting grain patterns
Knowledge You Can Build On — Est. 1998
Couple new maple bowls from crotchwood
Chris Groves
I turned a few bowls from some maple crotchwood I collected on Cape Cod last fall. Interesting grain patterns
Very Pretty
Those are Very nice.
Very nice, Chris...
GaryG in MD
What are the sizes?
Finish? How did you keep from yellowing them? ...Gary
Re: Very nice, Chris...
Chris Groves
Gary... the larger one is 6.25" diameter and 4.25" tall. the smaller is 3.75" diameter and 2" tall.
They are finished with 2 coats General Finish's Arm-R-Seal satin (Oil/Urethane) on the lathe and then I buff in beeswax with the same cloth that is wet with the finish.. then buff with soft clean cloth... I finish most of my bowls using this method... the resulting surface has a wonderful feel
Cool!
I've been looking for something...
GaryG in MD
...that won't turn maple yellow. Looks like you've found it.
The rap on water-based poly is sometimes that it gives things a slightly "bluish" tinge. Do you see that with this finish, or not?
Does it "pop the grain" in terms of bringing out figure and chatoyance? ...Gary
Re: I've been looking for something...
Chris Groves
Gary... yes it gives a nice 3 dimensional look of the maple grain. I have been using this General Finishes product on most of my furniture as well... it stands up well ... it like the satin over the gloss version... no it does not get a bluish tinge over time
I do not use it for salad bowls though... but it probably would be fine for that as well..
Gary, the "first generation" of H2O......
JamieDonaldson
...finishes was guilty of leaving a bluish cast on occasion, but the latest generations have solved that problem well. I've used General Finishes High Performance finish on my white woods for several years now, and don't aim for a finish that "builds." My dislike of the H2O finishes was raising the grain and slow drying, but GF has recently introduce a Woodturners Finish that has solved the slow drying dilemma, and it dries to an invisable surface in about 10 mins. and seems to be very durable as well. I buy it at Woodcraft, and don't know about availability elsewhere.
Chris and Jamie...
GaryG in MD
Based on your descriptions, I like the sound of this stuff.
I'll check with my Woodcraft store. Thanks for the tip! ...Gary