Vega duplicator problems and cutters?
mark
can't seem to find a way to contact vega for info or parts or even carbide cutters
Knowledge You Can Build On — Est. 1998
Vega duplicator problems and cutters?
mark
can't seem to find a way to contact vega for info or parts or even carbide cutters
Re: Vega duplicator problems and cutters?
Don McLeod
I googled Vega Woodworking and they have an 800# and an email address
Re: Vega duplicator problems and cutters?
mark
First I'd like to thank you for your response, but I think you're missing the real problem here. I'm sure there is a real company somewhere and there also may be a phone# but I've looked everywhere I could and found nothing so if you actually found an email address and a phone#, could you just type them into your response?
Re: Vega duplicator problems and cutters?
Grant Wilkinson
I'm not sure where you looked, but their website is http://www.vegawoodworking.com. Talk to Randy. I'm sure that he will help you out.
Just so you know for next time, if you Google either vega duplicator or vega lathe, you will get their website second in the list of results - right after and ebay entry.
Re: Vega duplicator problems and cutters?
Don McLeod
The #'s as listed on their website
217 963 2232
800 222 8342
email remvega@aol.com
Re: Vega duplicator problems and cutters?
Rob C
Ditto on Randy. he will get back to you within a day
BTW I have an almost unused Vega 36 pro that I might consider parting with
RobC
Re: Vega duplicator problems and cutters?
Curt Stivison
I may be interested in the duplicator. I am currently looking at one for my mini but I could put one on my 3520b.
Re: Vega duplicator problems and cutters?
Rob C
Curt
This one is way too big for a mini, but would work well on the PM. I need to pull it out
and take some pics....where would I send them?
Rob