Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Doc Green's Website *LINK*

Posts

Doc Green's Website *LINK*

#1

Doc Green's Website *LINK*

Doc Green

My website, devoted primarily to basic turning information, is now far enough along that I feel I can issue an invitation for you to have a look, if you're so inclined.

Presently, I have 46 articles (or parts) that cover most of what a new turner needs to know to get started. Included are instructions for using the tools, sanding, applying a lacquer finish, and so forth. I describe the method I use for freehand sharpening. There are hundreds of photographs - too many to count.

You experienced turners may find the article on scrapers interesting. It describes the burr in considerable detail, and I explain how to create a burr that will last more than 15 seconds. The article is based on what I have observed and what I can demonstrate in practice.

Also, there is an article that explains the origin of the f-stop system used in photography. It's a bit tedious, because of the math, but it explains the rationale behind all the funny numbers.

This information presented can, of course, to be found in books, other websites, and so forth. My objective is to bring it together in one place and present it in a manner that is easy to understand. It's a work in progress.

Your comments will be appreciated. You can email me privately, if you wish, by clicking the E-Mail Doc item at the top right of the home page.

~Doc


Doc Green's Website

Re: Doc Green's Website *LINK*

#2

BarbS

I like it!


Re: Doc Green's Website *LINK*

#3

Re: Doc Green's Website

Lewis Dodd

Wow''Great site. I can appreciate all the work you put into it! Thanks Doc.

Re: Doc Green's Website *LINK*

#4

Re: Doc Green's Website

Bill Turpin in WNC mountains

I lkie it too. Learned several good ideas in just five minutes. Link is going in my favorites.

Re: Doc Green's Website *LINK*

#5

Alan Zenreich

Re: Doc Green's Website

Alan Zenreich

Doc,

35 years ago, when I was a member of a professional photographers association, I attended a seminar where the presenter asked the following question to the 50 people in attendance:

"Can anyone tell me the full f-stops between 1 and 90?"

I knew the answer, because I understood how f-stops were calculated.... but I was the only one in the room other than the presenter who knew.

We got answers that included 1.2, 1.7, 1.8, 3.5 and the best was "it depends on the lens you bought"

When I trained new assistants, one of the first things I taught was how exposure systems worked. Knowing WHY you do what you do is, in many respects, as important as knowing HOW to do the things you do.

Now the next questions is what do you call the midpoint between f8 and f11? Although totally inaccurate, virtually every photographer I know would recognize that point if you called it f-eight-and-a-half < vbg >

Re: Doc Green's Website *LINK*

#6

Dick Hines

Re: Doc Green's Website

dick hines

Look at you! First a book and now a web sight. What is next for Doc?

I like it Doc.

Re: Doc Green's Website *LINK*

#7

Re: Doc Green's Website

Bill Noce in Northeast Ohio

Great site, Doc, good info......

Re: Doc Green's Website *LINK*

#8

looks good!


Re: Doc Green's Website *LINK*

#9

Re: Doc Green's Website

Tim O'Hearn

As a beginner at woodturning I found the articles I read to be very helpful in understanding what I am supposed to be doing. I will try out your advice tomorrow.

Thank you.

Re: Doc Green's Website *LINK*

#10

Re: Doc Green's Website

John Lucas

Doc Looks pretty cool. I'll have to take some time and read through the articles. Always interested in what you have to say.

Re: Doc Green's Website *LINK*

#11

Re: Doc Green's Website

Jim Sebring

Cool web site!

I just finished reading your 'chucking' book. Nicely done, with great pix. As a tool junk.., er, infrastructure maven, I learned a lot. I'm still not sold on using sheetrock screws on faceplates, though.

Re: Doc Green's Website *LINK*

#12

Thanks ...

Doc Green

Thanks for your comments and for checking out the site. My counter shows that 216 "unique visitors" visited the site yesterday. I hope you find something there of interest that will be helpful.

Tim H, Good Luck with your turning. The folks here on WC will be happy to answer any questions that may come up. All you have to do ask, and people who are expert in the area will answer quickly. Also, check in on Chat, Wednesdays, 9 pm eastern. One thing you will learn quickly is that there are many ways of doing the same thing, with equally good results, and you get to choose the method that you prefer.

And again, Thanks to everyone for providing information that allowed me to assemble the articles on my site. ~Doc

Re: Doc Green's Website *LINK*

#13

Re: Doc Green's Website

Lan Brady

What a great website.

It is easy to navigate and very thorough!

Looking forward to next book!

Lan