I finally have a digital camera that is capable of shooting HD Video, so I'm wondering if anyone has posted a guide to making good video presentations.
I know we have some real experts at still photography here, and quite a few WC turners have posted YouTube-style videos, so there must be a brain trust out there. I'm sure there are a few tricks to good lighting, good sound, etc...
Brad I still think mine have a long way to go but here's what I try to do. First is keep it short. Now obviously if it's project based it will have to be longer but consider editing out a lot. For example if you were turning a long taper there's no real reason to leave in the entire turning section of that part. Show how it's done make a few cuts and then edit out most of whats in the middle.
The two things I'm really trying to do is to use lighting that is the correct color and well lit so they can see what I'm doing. I'll be glad to send you a description of the lights I'm using. The work pretty well and aren't very expensive.
The second thing is to make sure it's sharp. Manual focus if you have to for tool close ups. What I'm doing now is turn the monitor around so I can see it, hold the tool up and move it around until it's in focus. You can edit out all the wagging of the tool before it's in focus. My new camera works much better in the auto focus mode than the previous one so I might be able to use that more.
Keep talking. Newbies don't know why we rotate a tools as were making the cut or why it doesn't catch when you start. Nothing is more boring than sitting watching a video of someone just turn. Like I said, edit, edit, edit. Show the important stuff and edit the repetition.
I haven't done it yet but consider adding a voice over if your not comfortable talking while your turning.
Zoom in. I see so many videos showing the whole bowl and he's talking about how the cutter is working but you either can't see the cutter (elbow in the way, etc) or it's just too small to see what it's really doing. I'm using Imovie on a MAC and I just noticed that I can crop after the fact. That should help me zoom in even more when I see it on screen and realize it's too small.
As I said I'm still learning and have a long way to go. I welcome all critics of my videos. It's the only way to get better. One thing I'm terrible at is not making a story board before I start. I do sometimes make a sort of list but a good story board would have a step by step layout of exactly what you plan to do and say so nothing gets left out and it will flow better.
Above all else, have fun. It will show in the final cut.
Keith I've been using a Canon ZR900. It uses tapes. It was about $300. The same thing in Digital was $800 and the only advantage I saw was downloading was faster. I just plug it in and let it download while I do something else so that hasn't been a problem.
What I'm changing over to (unless it won't do everything I need but I think it will) is a Nikon D5100. It is a still digital camera with video. If you were showing videos on large screen it would definitely be better but I don't know if it will be all that much better on a youtube video. We'll see. I hope to make another one shortly and see.
I spent twenty years or so in video production and editing, working for a Chicago area hospital, CNN, CBS/Chicago, and the Hospital Satellite Network. I switched over to selling pro video gear, the hours were much better and so was the money.
I wish I had a definitive book for you, but unfortunately I don't. Some simple thoughts: use high-level, fairly flat lighting preferably diffused (B&H Photo sells the diffusion material and you can clip it on your lights-it's fireproof). Get an editing program for your computer and learn to use it, edit ruthlessly-many of the videos I've seen are waaaay too loose and could be shortened considerably. Use a good tripod to hold the camera steady, otherwise you'll make your viewers seasick or worse. Plan your work and work your plan. Consider shooting all the segments and then adding voice-over in the editing phase. Many of the inexpensive cameras have auto volume control and it will lock on to the lathe motor and tooling sound, leaving your audio in the background (at best). Use a series of static shots, you don't need to zoom in and out constantly. Turn off the sound on the 11 o'clock news and watch the progression of video shots. Long establishing shots, stand-up by the reporter, cuts to field footage, wrap-up by reporter. No too many zooms in there huh?? It's certainly not rocket science; if I could make a decent living doing it, trust me, anyone can. Feel free to take this off line to my email address. Have fun, it's just not that hard.
You may have already thought about this, but you might want to borrow one of those D5100s and test it shooting video of you at your lathe. Video from DSLR cameras fall prey to rolling shutter (http://en.wikipedia.org/wiki/Rolling_shutter) and this can do strange things to your video footage (especially with objects that are rotating). The reviews of the 5100 state that they have been getting better at handling the rolling shutter, but it isn't completely compensated for. Just some food for thought if you will be relying on that camera to do your videos.
..distortions of fast moving objects are found in many focal plane shutter applications, variable dependant on whether they scan horizontally or vertically, as well as direction and speed of subject movement. Shutter speed and slit width are governing factors in focal plane shutter operation, and since I have no experience with DSLR video capture I defer to others in the field.
I just got it and haven't tried to use it for video yet. I will do a test this weekend and see. I've been wanting to try and use video to ask questions here on WC. It's so hard to describe cutting edges, shapes, and how they cut in words. I thought I would film a short clip that would pose a question and we could discuss it.
Any good questions you want to Ask? Anybody. I'm not necessarily going to answer the question but post it to the group with a video so we all understand what is being asked. Cutting angles comes to mind.
Check out this link to see an excellent video segment where in 11 minutes he shows how he builds a tilting router lift.
The lighting, the editing, the sequence are all excellent.
The creator, Mathias Wandel, has his own web site where he sells plans for woodworking machines that he makes. He had the tilting router lift at our woodworking club meeting last night and it works great