Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Face plates

Posts

Face plates

#1

Face plates

mark j. thill

I'm in the market for a larger face plate. Is there any difference in aluminum - steel - cast iron or stainless steel, or are they all about the same ?

Re: Face plates

#2

Re: Face plates

Carole Valentine

Don't know what kind of chuck you have but I use the dovetail faceplate rings almost exclusively now. I have the SN2. I have some aluminum faceplates but do not like them...always feel like the larger ones are flexing just a hair, though it is probably my imagination. I also don't like the soft aluminum threads on the hardened steel spindle threads. They can lock up.

Re: Face plates

#3

Steven Antonucci

Huge difference between aluminum and steel

steven antonucci

If you can afford the steel ones, buy them. The only advantage to aluminum is price. Oneway faceplates are exceptional.

Steve

Re: Face plates

#4

Re: Face plates

Bernie Weishapl

I use the steel face plates. Had trouble with the threads that screwed onto the lathe. So quit using them.

Re: Face plates

#5

Bronze or stainless steel

Bob Hackett

Iron or steel faceplates will stain any wood with high tannin content (like Oak and Chestnut) that you turn green.

Rust is always an issue with green wood regardless of species.

The only steel or cast iron faceplates I use anymore are the ones I had powdercoated. They still rust where I`ve chipped the coating but I beat the staining issues by using a dry block between the faceplate and the blank.