I had a very short list this year. 2011 has been a year that I could have done without, so I will be glad when it finally gets the heck out of here...
The Woodcraft flyer had the 2 4" Kutzall disks that you can put in an angle grinder for $29. Normally, I think they are $39 each. I put them on my list for the big man, and I found them in my stocking yesterday morning. Dressed in my holiday best, I gave them a quick check on a scrap. Fun will ensue...
Were you naughty or nice? What was your best gift under the tree?
... when I acquired (with the full knowledge of SWMBO) over 100 pounds of FBE that I have since roughed out. New Year's wish is for no checks or cracks. That and I am registered for Mr. Stafford's class at JCC in June. Not traditionally timed, but Santa was very good to me.
Since neither of our adult sons live with us anymore (hurray), the Christmas tradition has changed; do other see that as well? Not better or worse, per se; just different.
When my wife and I were first married and like most young couples didn't have much money and even less sense we would give each other gifts that cost more than we could afford and were really meaningless. As the years went by we moved to selecting gifts that meant something but still cost too much and took months to pay off. More years went by and happily our income increased but we started giving from the heart rather than the pocketbook. One year I wove her a shawl and she made and embroidered a jacket for me. Now we are at a stage where gifts are more of a year around thing not just Christmas and birthdays. If I see something I think she will like I'll get it for her and she will do the same for me. If either of us want something we talk about affordability and need or if it's some little thing we purchase it.
This leaves hole at Christmas that really struck home this year. As usual I sent her links (and my account number) to a couple turning items I wanted and she sent me a couple Amazon links for some books she wanted. They came, were wrapped and placed under the tree. Christmas morning gift giving was about as exciting as putting away groceries. We talked about it last night and decided this was the last year of exchanging links. I might not weave her another shawl but if nothing else I can make mulch for her flower beds .
Wife buys me new clothes and something small. Most of my gifts are really OUR gifts (family)...except I usually try to find one thing that is just for her...
I had nothing on my list, so I was thrilled when my kids gave me a tool that I didn't already have (a very tall order). I got a David Ellsworth jig for the wolverine. I was impressed that they actually drove to his house to pick it up. I also fell short on time and was only able to make half of the things I would have liked to, but was very happy with those things I was able to finish. The best present came on the 22nd, and was the reason I had little time. We had to travel to Clemson, S.C. for our son's graduation. He made us very proud graduating with 2 degrees (English and Psychology) in 3 1/2 years Summa Cum Laude. Life is very good.
We also had a fairly quiet Christmas - a bit like putting away the groceries as we also exchanged links. But, we did get what we wanted in the end. I'm pretty excited to finally own a Glaser 1/2" Bowl Gouge - haven't really tried it out yet but it is a beautiful tool!
I've included a pic of the items that I got for Chrismas - new Oneway hat, bench cookies from the kids and my new Glaser!
For the first time in many years I did not receive any wood or tools for Christmas. I received some beautiful turned objects from my friends which brightened my day.
My wife and I are giving each other a new countertop range, range hood and roof for Christmas....Hurricanes and other storms have taken their toll on my 10 year old roof and it is such a patchwork of repairs we decided that we needed to start from scratch.
2011 was an interesting year with extreme highs and extreme lows. I lost two immediate family members and a couple of close friends. On the high side I was able to go on the Woodturning Cruise thanks to Mike Hunter. All in all it will be a year to remember.
With the kids now grown and mostly on their own, my wife and I decided to do a low key Christmas. On a trip to visit our son Colin, Susan and he went to an art museum in Baltimore and discovered the art of Greg Mort. She knew I would love it she was right. He is truly an amazing artist. His work is in the collections of many presidents, the White House and has taken a ride in the space shuttle.
I lIve a mile away from Stellefane, which is the meeting place for the Amateur Telescope makers of America. Brad Vietje used to be the president of the club there. There is an amazing, unique telescope there that was designed by Russel Porter. He helped design the Mt. Palomar observatory and was an explorer and artist. We have a watercolor of Russel Porter's. The connection with this gift is that Greg Mort bought the house that Russel Porter built and lived in in Port Clyde, Maine. Greg is an avid amateur astronomer, and the theme definitely comes through in his art.
So with that background, you may understand that we just had to get a print of his work. We can't afford one of his originals but decided that a lithograph and the framing for it, was a perfect gift to give each other. Check out his website, http://www.gregmorteditions.com/ you won't be wasting your time. This is a pic of the piece we picked entitled "Stewardship".
You'll really like that Glaser 15V! - Mine is one of my go-to tools for roughing and doing general shaping.
I've also had bench cookies for a while, but have only used them a few times - it might help if I actually ever did any flat woodworking. Non-turning stuff probably now accounts for less that 10% of the time I spend working with wood.
I didn't ask for any gifts this year, (...nor did I give any hints!) - I already have the tools and wood to get through months of turning already - nothing really needed here, for which I am thankful!
I did buy myself one gift - the saw chain sharpener from Northern Tool (number 193020) that Mark Mandell suggested here at WC back on "Black Friday" - it was $40 off the normal $130 price was a seemingly good deal so I took the plunge and bought one. Had it shipped to our local Northern store, so shipping costs were zero. When comparing the Northern sharpener to the Oregon 510A and the Tecomec 136, I really could not see any functional differences between the Northern sharpener and these comparable units, even though the latter are considerably higher in price ($300-$400+). I've already sharpened three chains, and the results seem to be as good or better than the 'professional' sharpening I've gotten done from local chain saw shops. At $5 to $7 to sharpen a chain, I think the sharpening savings will quickly accrue to the $90 purchase price, and the unit will pay for itself within the first year!
I hope everyone is having a great Holiday season and I wish you all the best in 2012! I hope to meet many of you at the AAW Symposium in San Jose next June!
Steve, bench cookies (in theory - haven't yet tried them) are little hockey pucks with foam on each side. The idea is that you put 3 - 4 of them down on your bench and then lay your workpiece on top for sanding, etc. That way, your work piece is supported off the bench where the bottom surface is protected from whatever may be on the bench (e.g. grit that could scratch, etc).
I figured that with a couple of twin beds in my near future (bought the wood a couple of weeks ago), that I could probably use them and see if they're worth all the hype that Rockler is trying to give them.
Yes. That was to see the look one my dad's face when I gave him his 2 new Glaser bowl gouges. They are really nice gouges. Paulo, the owner of Glaser, was very helpful. Highly recommend..