punky maple
darrin hill
got a bit of spalted maple (from various sources) and i made a 2 inch pendant for my wife... it was punky and had a few holes in the surface after turning and sanding, so i thought i could put on a lot of lacquer and it would fill in the hole...
nope.. either that or i didnt put enough..
so a guy at the san antonio wood craft said to try this..
cut out a coke can bottom.
take pendant blank.. cover back of pendant blank with tape...
put blank in can bottom..
cover with 24 hour liquid epoxy.. let blank soak it up until it wont soak no mo..
let dry...
results are crystal clear resin that can be turned to pendant, sanded and buffed...
this a good method?
whats a good 24 hour 2 part epoxy?



