Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

truck lift *LINK*

Posts

truck lift *LINK*

#1

truck lift *LINK*

John Lucas

Anybody think this is any good at all. It attaches to your receiver hitch. My new truck is really tall and I need something to move bigger logs. I also need something that might let me lift the motorcycle but don't know if it would work for that. My bike weights less than the maximum capacity so maybe.

I've looked at lift gates but they have to be permanently installed. This one can be removed although it not as large and looks kind of jury rigged. The lift gates run close to $1000 and the ones in that price range don't have any higher weight capacity.


http://www.globalindustrial.com/p/material-handling/dock-truck/truck-suv-accessories/battery-powered-pick-up-truck-hitch-li-550-lb-capacity

Re: truck lift *LINK*

#2

Lyle Jamieson

Re: truck lift

Lyle Jamieson



I hope this is a photo. I dont know how it is supposed to work. I put this on my trailer. The top part comes off for storage and I leave the lower post bolted to my trailer. I have lifted large tree trunks and it can swing around into the bed. About $150.00 in Harbor Freight. It works rather slow but I dont use it often enough to justify the big bucks. They have other truck hoists. I also use an enguine hoist with casters on the floor to position heavy wood blanks on my lathe.

Re: truck lift *LINK*

#3

Lyle Jamieson

Re: truck lift 


img

Re: truck lift *LINK*

#4

Lyle Jamieson

Merry Christmas

Lyle Jamieson

I cant dunk a basketball or load a photo, Dori, my talented wife had to do it for me. (:-/)

Before all the family comes to visit I want to wish you all in my turning family a Merry Christmas and Joyful Holiday season. Enjoy!!

Re: truck lift *LINK*

#5

Re: Merry Christmas

mjonesrdg

And, from my family to yours: Wishing you a "best ever" holiday season!

Re: truck lift *LINK*

#6

Re: truck lift

Jim H

My BIL has something similar that he uses for loading ac units. He loves it.

Re: truck lift *LINK*

#7

Re: Merry Christmas to you all as well


Re: truck lift *LINK*

#8

Re: Merry Christmas

Neil Longhenry - Rogers, MN

Merry Christmas to you and yours Lyle,

Thanks for your prompt responses on various questions I have had about your Hollowing System. Perhaps 2012 will be the year -- Neil

Re: truck lift *LINK*

#9

Re: truck lift

Bernie Rose

John: If you go for one of the type Lyle uses besure toadd some hefty angle irons undrneath to distribute the load. Even bolting the hoist to the frame wil not be enough to keep from bending the sheet metal.

I tried to load a 200# log with out the reinforcing, but stopped and got some angle irons installed before loading the log.

Re: truck lift *LINK*

#10

Re: truck lift

John Lucas

Bernie I have looked at those and thought that might be a problem. I thought I might look at the possibility of making the crane fit the receiver hitch so it's removeable when I don't need it.

Re: truck lift *LINK*

#11

Didn't Bill Grumbine Install

John Kaner

I remember that Bill had bought a harbor freight model. I thought he really liked it once it was installed. He probably has some good input...

Hope this helps...

Re: truck lift *LINK*

#12

Re: crane in the receiver

Steve Criscenzo

John

I built a frame for mounting a BC crane in my receiver. I posted pics a while back. I will see if I can find the pics and repost.

Steve

Re: truck lift *LINK*

#13

Re: crane in the receiver

John Lucas

Thanks. what I'm actually thinking is something offset. I would like the crane to be offset from the center so I'm thinking the thing to do is to make it swivel using the receiver hitch as the pivot point. I'll use trailer tongue rollers to support the outboard side where the hitch will be.

maybe I can modify a engine hoist so the whole thing could be hauled on the receiver hitch similar to the way they haul fork lifts on the back of the construction trucks. Then the whole thing could be removed using the wheeled lifts that fit on trailer Tongues. If you used big pneumatic tires on these, if they make them, the whole thing could be rolled with log in tow.

Of course I have ulterior motives of being able to move industrial metal working machines that you can buy really cheap if you can move them and convert them from 3 phase. I'll make some sketches today and try to figure out how to use my scanner. I can't seem to find it on my new computer but then that's what a 22 year old son is for.

Re: truck lift *LINK*

#14

Re: truck lift

Dick Wilson

Hi Lyle, I have a friend who has one of these hoists on his trailer. We used it one day to trailer some logs for our guild. You are correct in saying it is a rather slow process, but, when two Paul Bunyons can't lift the log this is the ticket. My friend used a cordless drill instead of the crank and it goes much faster.

Merry Christmas Lyle

Re: truck lift *LINK*

#15

Walt Bennett

Re: truck lift

Walt Bennett

Years ago I picked up a utility trailer with drop down ramp and 2" square high rails. Mounted a deep cycle battery & box on the tongue and a small Warn winch on the front rail. Sometimes have to use some scrap plywood to get logs to slide easier up the ramp, but I've picked up some weighing well over 600 lbs with this set up. Since the trailer is much lower to the ground than my truck bed, it's a lot easier to use - also doesn't drain my truck battery and leave me stuck somewhere in the woods.

Re: truck lift *LINK*

#16

Re: truck lift

John Lucas

Walt My friend Brad Sells uses this method. He has a large trailer like you would move cars. A big winch and put an Oak bed on it. I've seen Brad load a maple tree section that was about 4' across and 7' feet long. I have a small trailer but don't have it rigged up for logs yet.

Re: truck lift *LINK*

#17

Receiver Mounts

A. Kapocius

Check archives back mebbe four, five years back for post by Al Crandall who welded up one of these to fit in the hitch receiver.

Harbor Freight has two different hoist models, one with a lower post than the one shown. I've picked up a HF pickup bed extender which fits in the receiver. The square channel fits neatly inside either round post. I figger to make one similar to Al Crandall with a little judicious hacksawing, a 1/4" plate for a base, a couple of trailer jack legs and welding. All I need is warm weather and an opportunity to clear the garage of flammables.

Al Kapocius

Re: truck lift *LINK*

#18

Re: truck lift

TomCollins

John, I have a lift like Lyle shows. I built a bracket so it slides in and out of my hitch receiver and it is offset to the left. It sits about at the same location shown in the picture but it is down at hitch level. I use it quite a bit for loading logs in my truck. I don't think this setup would work for your bike since the arm does not go high enough to get a bike into the bed and you would have to rig up some system of straps to lift the bike with.

What about one of those motorcycle racks that go into your hitch receiver. Then you would just need a short ramp.

TomC

Re: truck lift *LINK*

#19

Re: truck lift

John Lucas

Tom I'm probably going to buy one of the bike carriers for my hitch. Short of a lift gate I don't think it's feasible to have both.