Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Look, said the small pot....

Posts

Look, said the small pot....

#1

Look, said the small pot....

ronnyeelen

... this is my family!

The smallest was here before. Now it came back with the rest of the family.


The wood is spalted beech.

Sizes vary from about 5" to about 13".

The smallest one was hollowed using a small Hunter tool, the next one using a larger Hunter tool, the third one was hollowed half way down with the same larger Hunter tool and bottom half using the Kelton hollower. The largest is hollowed using the Jamieson hollowing tool.

They are all kind off side grain oriented to get the grain pattern I was looking for.

All Comments and Critques are very welcome.

Ronny

Re: Look, said the small pot....

#2

Don Leydens

Re: Look, said the small pot....

Don Leydens

Hi Ronny! What beautiful shapes and wood. Great job on all of them.

Re: Look, said the small pot....

#3

Re: Look, said the small pot....

John Lucas

man they are all sweet but I like the 2 on the left the best. Good job.

Re: Look, said the small pot....

#4

Re: Look, said the small pot....

Randy Gleckler

Ronny,

Great job, those all look great. Love the wood as well

Re: Look, said the small pot....

#5

Steven Antonucci

Exquisite.


Re: Look, said the small pot....

#6

Ellis Walentine

Nice work

Ellis Walentine

I like the openness and the varying degrees of recurve in these pots, Ronny. They resist the impulse to be closed forms (except the smallest one). And thanks for the grain orientation tip. I'll have to try that on something soon. I'm suspecting that this type of orientation can lead to some interesting distortion when the pot dries, assuming you're turning green wood.

Excellent job.

Ellis

Re: Look, said the small pot....

#7

Very nice work. Very nice indeed !

Ray Carson - Lawrenceville, NJ

I wouldn't seperate the family.

Ray

Re: Look, said the small pot....

#8

Very nice

Mike Foster

Love the forms. The wood is also beautiful. Love the combination of the spalteing with a little chatoyance. Did you use a burl, or crotch wood? Looks like there is some figure in the beech, which is often pretty bland.

Re: Look, said the small pot....

#9

very nice!..


Re: Look, said the small pot....

#10

Re: Look, said the small pot....

charlie belden

If you can find out how these things reproduce you could make a fortune!

Turners are tempted to show off techniques - beads and coves, V cuts and Ogees. With highly spalted wood, simple forms show off the wood and the spalting much better - as this family clearly illustrates.

Very nice family and a very nice family portrait.

Re: Look, said the small pot....

#11

Re: Look, said the small pot....

Ronnyeelen

Hi,

Thanks!

There seems to be a general call out for keeping them together :)

Just try it Ellis, not only gives it nice grain pattern, more distinct, it is also easier to hollow. At least that is my experience. This wood was not really wet anymore. The tree has been cut about 3 to 4 years ago. And it was cust into blocks already long ago. Also the condition of the wood, with the spalting and the deteria..thingy (don't know that word) helps in keeping it in shape. So when doing this in wet, freshly cut wood, it should indeed be interesting to see what it does. Show us :D

Mike, this was a really big tree, to our standards anyway. 150cm (60") at the widest point I measured back then. But there was no crotch, some burl maybe. And some blocks would have been from the area where the trunc met the root.

Charlie, too bad they don't do this themselves. It would save me the work :) . But then again, all the fun is in the making.. :b

thanks again

Ronny

Re: Look, said the small pot....

#12

Re: Look, said the small pot....

steve worcester

I very much like them. Do they have a personal significance, or did you just have 4 pieces of wood? Are they from the same tree or trunk/branch?

Re: Look, said the small pot....

#13

Re: Look, said the small pot....

John Scheideman

I like those a lot! Nice job. BTW where do you get spalted beech? I can never seem to find any for sale that are of good turning size.

John

Re: Look, said the small pot....

#14

Re: Look, said the small pot....

ronnyeelen

There is no real personal significance, but they are not just 4 pieces of wood either.... every single piece of that pile will always bring back the memories of sweat, blood and tears of converting that tree into manageable blocks.

See below.

Re: Look, said the small pot....

#15

Re: Look, said the small pot....

ronnyeelen

Thanks.

Well, this one didn't come in a bite-ready size either.






regards

Ronny