Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Stewart System Chatter Tool blades

Posts

Stewart System Chatter Tool blades

#1

Stewart System Chatter Tool blades

Emmett Manley, Lakeland, TN

Does anyone know of a source for the Stewart System Chatter Tool blades/cutter? The folks at Packard said they don't know of a current source for the blades as the tool has been discontinued. Any help, or even good leads, will be appreciated.

Re: Stewart System Chatter Tool blades

#2

How about shop built?

John Kaner

Hope you can use this...

Folks have used vise grips and a jig saw blade...

Plenty of good steel around. Thrift shops sell kitchen knives very inexpensively. Saws -all blades wear out, but have great steel. Looking for a springy steel. Sheet metal shops have small scraps they usual;ly give away. Look for stainless steel. Higher the number, thinner the material... So, 16 gauge vs 24 gauge. Tell them what you're doing and they'll have ideas too. Remember, it's all about the vibrations. CSUSA has a new kit. The new kits have various shapes for the inserts.

Re: Stewart System Chatter Tool blades

#3

Re: How about shop built?

Emmett Manley, Lakeland, TN

John, thanks for the excellent chatter tool suggestions. Actually, my inquiry was on behalf of a friend who has the Stewart system, likes it, and can't find replacement blades/cutters.

I rarely do any intentional chatter work. :D

Re: Stewart System Chatter Tool blades

#4

Re: Stewart System Chatter Tool blades

karl in Iowa

Try Kip Christensen at BYU. At SWAT, he showed a tool he made that had blades similar to the Stewart.