Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Someone needs to watch this?

Posts

Someone needs to watch this?

#1

Steven Antonucci

Someone needs to watch this?

steven antonucci

Not that I want to let the cat out of the bag, but someone on WoodCentral needs to watch this video in a day or so when a box will arrive at their door. This video will greatly enhance their understanding of one of the items in that box.


A not so Secret Santa...

Re: Someone needs to watch this?

#2

Re: Someone needs to watch this?

Stuart Johnson

Steve, I don't see how you are able to fit a full family life, working, and all the unrelated interest into your day. Although it does seem you combine the interests in some manner with woodturning. Blacksmithing and tool making go together but it must have been a stretch to come up with turning and chainmail for the interlocking rings.

Sometime when you are sitting around wondering what to do would you do an in depth video making and sharpening a hook tool? You might also think about getting one of the kids interested in cinematography so you can use both hands.

Re: Someone needs to watch this?

#3

Steven Antonucci

Chain maille is turned

steven antonucci

After surfing YouTube to learn how to do it, I surfed YouTube again to learn how to make the things you need to do it.

As it turns out, I tripped across a video of a rig that a guy had made with a drill and a bunch of wood and steel. It was functional, but it was some geeky kid in his parents basement. I've got skillz. (and a well equipped shop!)

As it turns out, winding the metal around a mandrel is exceptionally easy to do on a 1.5 HP Nova. I grabbed a piece of 3/8" steel and drilled a hole. Insert wire. Turn handwheel to get the first coil or two and lock everything together. Put on heavy leather gloves to hold the spool, and flip on the lathe. At 200RPM, it's very manageable. I suspect I could slip the belt down a notch or two with no issues.

I "turn" a 16" coil in about a minute. Each link is hand cut off with aviation snips afterward. My son was the one that got me started, so it's family time. One of the twin wants to be like his older brother (other one doesn't care) so we give him some links and pliers. My daughter claims all of the bracelets.

So, it's easy to combine family and turning and outside interests (at least in my mind :) )

Steve

P.S. I'll think about the hook video. as it is, I am a hand short when I make them and there is already a fire burning...

Re: Someone needs to watch this?

#4

Re: Someone needs to watch this?

Stuart Johnson

Steve did you change videos on your post or have I slipped over the edge? When I responded to this thread I'm sure I had just viewed and was replying to the one where you showed the different items and the hook tool. My request for an in depth hook tool makes even more sense with the video that is now showing but I hadn't viewed it yet.

Re: Someone needs to watch this?

#5

Steven Antonucci

I posted two videos last night

steven antonucci

One had all of the items I made.

The other was a demo of the hook tool with a brief explanation of how I make them. This one is meant to show the recipient what to do when they open their box.

Steve